Introduction: Cord Case

Picture of Cord Case

This is cord case.

Earphone,USB cable, etc.

material: MDF 2.5mm,felt


Step 1: Data

Picture of Data

Make the data(body and felt) in illustrator.

Step 2: Cut

Picture of Cut

Cut the MDF and felt in the laser cutter

Step 3: Crossed in the Provisional

Picture of  Crossed in the Provisional

    Crossed in the provisional.

    Step 4: Paste

    Picture of Paste

    Return something to the original condition.

    Paste the felt in the bond.

    Step 5: Assemble

    Picture of Assemble

    Assemble the parts.


    DIY Hacks and How Tos (author)2016-10-23

    That looks great. If I had access to a laser cutter, I would make one of these for everyone of my cable sets.

    Thank you:-)

    Leonous (author)2016-10-25


    Narimatsu (author)Leonous2016-10-25

    Thank you for seeing.

    This is not plagiarism.I'm the same laboratory as the creator.

    I learned how to make together.

    About This Instructable




    More by Narimatsu:Lamp shadePackage BoxSORAMAME stool
    Add instructable to: