Introduction: Duct Tape Shoes
This Instructable will show you how to make duct tape shoes.
This is my first instructable so please give me ideas on how to make my next one better:)
Step 1: Get Your Materials
For duct tape shoes, you will need...
~Duct Tape
~Cardboard
~Scissors
~A Pen
~Flip flops or shoes that fit you
Step 2: Trace Flip Flop or Shoe
Trace the flip flop or shoe onto the card board
make sure to trace both flip flops/ shoes or else you will have two of the same feet
Step 3: Cut Out
Cut out the shape from the cardboard
Step 4: Cover the Cardboard
cover the cardboard wit tape, make sure that the tape goes all the way over the cardboard, you will just cut it off to make it look better
Step 5: Cut the Extra Duct Tape Off
Cut the extra duct tape off so that it looks like a shoe
Step 6: Make the Strap for the Shoe
make a strap that goes on top of your foot
if you have questions, look at the pictures
Step 7: Attach More Straps
Attach more straps until you get to your toe.
Step 8: The Heel
Attach the heel
Take a piece of cardboard, and cover in duct tape
look at pictures to get more info
Step 9: Add Straps to the Side of the Shoe
add the straps that connect you the shoe and the straps
Step 10: Do the Next Shoe
You are done with the first shoe now so follow steps 4-9 to make the other shoe
Step 11: Put More Duct Tape on the Sole
The bottom of your shoe should be really messed up, so put duct tape on the bottom to make bottom less sticky
Step 12: YOU'RE DONE!!!!!
you're done now, so go and show off your new shoes!!!!