HOW TO TURN ANY WEBCAM INTO a HIGH POWER MICROSCOPE.....

Hello friends,
this is my first instructable that i made using my old SVB webcam.
It's really simple to make..
just place anything 1.5cm away from camera lens and enjoy the crystal clear highly magnified images...
PLZZZ VOTE FOR ME IF YOU LIKED IT....
let's begin.....

Step 1: Materials Required...

• here is the list of materials required...
• WEBCAM
• SCREWDRIVERS
• FEVIQUICK
• EMPTY SOAP BOX
• CELLOPHANE TAPE
• AND SOME BRAIN AND TIME

Step 2: Opening the Webcam......

first of all open your camera beware not to destroy the cmos sensor....
i extended the wires of the image capturing button outside the webcam which allows us to have still images..
i also a switch to turn the led's on or off they were yellow and grey it may be different for yours.....

Step 3: Reversing the Lens...

second step is that we have to reverse the lens placed over the cmos sensor.......just place it 2-3mm away from the cmos sensor...

Step 4: Close the Cover....

after reversing the lens screw the webcam back..... now its ready to use but i made a stand to get still images from it......

Step 5: Final Body....

i used a soap box and fixed the webcam over it and as u can see from image it can be adjusted for getting images
also i used a mirror below it so that the light spreads all over the object placed over it and also it provides the light from below the object....
ALL DONE....PLACE ANYTHING BELOW THE LENS......ENJOY. :)

Step 6: OUTPUT ON PC.....

these were some pics clicked by this microscope/webcam that even includes the amoled screen pixels of my mobile (galaxy note) and LCD monitor pixels and paper too......