Introduction: Intro to ARM Part 1

In this first video I will be giving an intro into the STM32F0Discovery development board that we will be using for the next few videos.  I will be describing the hardware of the board and what all the dev kit has to offer.

Link to ST's website for the discovery board is below:

http://www.st.com/stm32f0discovery

In this second video we will be looking at how to code a simple blink program using Keil uVision IDE software.  I have included below some links to some very helpful information regarding the arm processor that we are using.

ST STlink software download
http://www.st.com/internet/evalboard/product/253215.jsp

Understanding the STM32F0's GPIO part 1
http://hertaville.com/2012/07/28/stm32f0-gpio-tutorial-part-1/

Keil Download
http://www.keil.com/arm/mdk.asp

Comments

About This Instructable

1,290views

5favorites

License:

More by misperry:HomeAssistant - Custom WiFi Enabled GPIOHosting Https for AlexaPi Custom SkillCustom AlexaPi Skill
Add instructable to: