Hey guys and today I bring you something a little bit different. Many years ago I found instructions for a biplane on a website that doesn't exist anymore but at least I did print of the instructions. Several years later I couldn't find them, thinking that I threw them away by accident and that was it. But would you believe it I found them and decided to share it with everyone on instructables.

Also check out my other creations and instructions

https://www.instructables.com/id/Knex-1975-CZ-75-Instructions/

https://www.instructables.com/id/Knex-1976-MP5K-Instructions/

https://www.instructables.com/id/My-Knex-Weapons-Of-2013-2014/

https://www.instructables.com/id/Knex-James-Bond-Helicopter-With-Saws/

https://www.instructables.com/id/Knex-Galvaknuckles-Instructions/

https://www.instructables.com/id/Knex-1979-SPAS-12-Instructions/

Step 1: Parts List

If you have any trouble or need more pictures just leave a comment and I will get back you ASAP. I strongly advised you to collect all the pieces before you start building. Also I have added a few notes throughout this instructable to make it more easier to understand something if you run into any difficulty.

Green Rods - 183

White Rods - 167

Blue Rods - 44

Yellow Rods - 15

Red Rods - 4

Green Connectors - 20

White Connectors - 33

Blue Connectors - 18

Yellow Connectors - 55

Red Connectors - 97

Purple Connectors - 48

Light Grey Connectors - 26

Dark Grey Connectors - 54

Orange Connectors - 47

Tan Connectors - 10

Tan Connectors (with the little tab cut off) - 1

5.9cm cut Rods - 2

Wheel Hub Small - 6

Wheel Tyre Small - 6

Blue Spacers - 39

Total - 875

Step 2: Propeller

Step 3: Fuselage Part I

Step 4: Wheels

Step 5: Tail Fins & Rudder

Step 6: Fuselage Part II

Step 7: Wings

Step 8: Done

Well done you made it to the end, I do hope you have enjoyed building it.

Thanks for building it, please leave a comment in the box below and subscribe