Knex TR12 Turret Instructions


Introduction: Knex TR12 Turret Instructions

About: "For God so loved the world that he gave his one and only son, that who ever believes in him shall not parish but have eternal life." ...

Well here it is. WARNING: requires cut parts. You must have A TR gun body if you want this turret to work.

Step 1: Making the Turret

Read all image notes.

Step 2: Customizing the TR Gun for the Turret

First go build the latest and newest TR body without a turret than do this. Go to KillerK's newest topic about the TR series and build that gun, but without the turret. Read all image notes.

Step 3: How to Use the Turret

read all image notes.

Step 4: Finished!

Yay, your done. Know go shoot it around but don't hurt anybody.



    • Planter Challenge

      Planter Challenge
    • Casting Contest

      Casting Contest
    • Make it Move Contest

      Make it Move Contest

    We have a be nice policy.
    Please be positive and constructive.




    Talk about overkill, if you're going to break that many pieces it's not even k'nex.

    7 replies

    i know you posted this a long time ago, but i stumbled upon it, and had to say: disagree !!! broken parts are still k'nex. i don't think the broken parts used here are needed, but some mechanism's do require quite a few broken pieces, and most people have them. the main broken pieces you want to have is at least a half dozen broken white rods and 2-6 broken orange connectors (cut in half)...

    Well, I just ground up 20,000 grey connectors, and molded them into a Famas. It shoots better than an airsoft gun, with the mechanism I installed. It's a k'nex gun, right?

    omg epic. you have to post a picture lol!!! did you use a regular pin mechanism? shoots BBs i assume?

    I had these pieces broken before from past experiences.

    But how many other people have? I just hate to see broken pieces because I don't have very many, haha.

    Believe me, I'm not of fan of broken pieces either.

    Meh. Either way.

    The only broken part I see could be replaced with 2 spacers. So unless I'm missing something broken parts aren't required.

    6 replies

    Yeah there is, look at the second step, you have to cut parts on the gun part if you want the gun to work.

    Please enlighten me more with pictures.

    Oh, ok. But do you at least remember what parts on the gun were cut?

    Oh, wait... So it doesn't work on, say, a turret pistol for example?

    3 replies

    It probably would, but you would have to customize the turret to work with the turret.

    "...customize the turret to work with the turret." LOL.

    sorry, meant customize the turret to work with the gun.

    I built oodalumps' "Handle Pump TR8" and modded the front a bit and this turret works great. Thanks for posting. 5*