Print PDF
Favorite
Email
Step 13Wiring
Envelope #5 (Wire) - This envelope takes several steps.
(BACL)-Battery Clip Jig.cdr - Used to help solder the 9 volt battery clips to the 2.1mm plugs
- Apply double sided tape to the back of the battery box
- Strip and cut the wire pieces - (using our DIY Wire Cutter and Stripper (details)
- Solder the 9 volt battery clips to the 2.1mm plugs (using an acrylic soldering rig (attached))
- Ready to stuff
(BACL)-Battery Clip Jig.cdr - Used to help solder the 9 volt battery clips to the 2.1mm plugs
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
