Introduction: Solar Powered Water Disteller/Filter

Picture of Solar Powered Water Disteller/Filter
  • Required:
    • 2 - 500ml bottles
    • Glue gun
    • 2.0 mm Drill
    • Drill machine
    • PVC pipe

Step 1: Glue the Bottle Caps Together With the Glue Gun.

Picture of Glue the Bottle Caps Together With the Glue Gun.

Step 2: Drill Between the Caps to Make a 2.0 Mm Diametered Hole

Picture of Drill Between the Caps to Make a 2.0 Mm Diametered Hole

Step 3: Glue the Pipe With One of the Caps From Inside

Picture of Glue the Pipe With One of the Caps From Inside

Step 4: Success!

Picture of Success!

Put dirty water in one of the bottles and put the cap without the pipe.

Keep in sunlight for a while and water will collect in the upper bottle.

Dirt is left behind.

Step 5: Please Don't Forget to Watch This DIY Video

Step 6:

Comments

barrieluck1 (author)2017-11-07

what a brilliantly simple idea! I’m going to try it. Though it remains to see if November in UK will be warm enough to drive it. And you have a small typo. 2.0mm versus 20mm.

About This Instructable

68views

2favorites

License:

More by VaradJ1:Solar Powered Water Disteller/Filter
Add instructable to: