EVERYBODY I AM MAD BECAUSE I READ THE COMENTS AND THERE NOT THAT NICE. SO KEEP YOU OPION TO YOUR SELF UNLESS IT IS SOMETHING GOOD BECASUE THIS IS A PROTOTYPE I KNOW IT'S NOT THE BEST GUN OUT THERE BUT I TRYED TO BUILD A GUN FOR ONCE AND ALL I GOT IS SOME RUDE COMENTS. AND YOU PEOPLE KNOW WHO YOU ARE.

pros:
Decent range for what bands i have on it
Small
Not many peices

cons:
Not the best
Two cut peices
Ammo green rods
Needs a magazine if any one can build one please leave a comment and some pictures it would help alot thank you

peices:
Green rods: 52
White rods: 18
Blue rods: 11
Red rods: 1

Connectors:
Yellow connectors: 17
Y connectors: 4
Red 3 slot connectors: 24
White 8 slot connectors: 12
Orange 2 slot connectors: 2
Gray 1 slot connectors: 4
Blue clip: 1
Y connectors: 6
Hinge: 1
Blue spacers: 2
Rubber bands: 3

IMPORTANT!!!!!! READ THE NOTES

Step 1: The Body of the Gun

Step 2: The Front Part of the Gun

Step 3: Putting the Gun Together

almost done

Step 4: Putting Rubber Bands On

so close

Step 5: Done

so now you pull the firing pin back far enough so you can push the bullet in the breech on the top and then aim and FIRE. remember don't point at faces have fun and remember it shots green rods.