With Instructables you can share what you make with the world, and tap into an ever-growing community of creative experts.
Universal 3D-printable flashlight stand
#3DBenchy - The tool to calibrate and test your 3D printer
Shower Cabin Hook Accessories
For those who want to try #3DBenchy as a 3MF file in the slicing software, we have now created and uploaded the file 3DBenchy.3mf. It is a modern file format better suited for 3D printing. For more information visit http://www.3mf.io/The original 3DBenchy.stl original file weighs 11,3 MB. The new 3DBenchy.3mf weighs just 3,1 MB but still contains the exact 3D surface information. Please note that not all 3D printing software packages today support the new .3mf file format.
Universal stand-alone filament spool holder (Fully 3D-printable)
Smartphone Photo Studio for #3DBenchy and tiny stuff
3D-printable coffee table (coaster)
Build a Laser Cut and Soldering Dobot Robot Arm
Adjustable Extruder Drive Block Upgrade for Replicator 2X
Universal 3D-print Filament Filter
3D printable grip and lens cover for ASUS XTION handheld 3D scanner
Our "quick-fix" for the issues you are experiencing, is to recommend you to check tension of the belts driving the X and Y axis of your 3D printer.For a better analysis we would need to know much more about your machine, settings, material, 3D-printing environment, etc.
This was very interesting to read! Thanks for sharing this information :)
I went to the 3dBenchy home page found a link for troubleshooting but the link doesn`t work,when My chimney is not 7 mm round or my storage compartment is not 12 mm square or i can read the name on the bottom of benchy but cannot read it on the stern where do i find where it explains to me what needs to be adjusted ? I downloaded the pdf file for 3dbenchy it has pictures for the " Measure and Calibrate " ok how and what needs to me calibrated ? What am I missing here aside from the knowledge to Calibrate ?
Hopefully you can get a 3D printer soon. In the meantime you can look for a local 3D printer owner at https://www.3dhubs.com/. Someone will surely make a nice print of the hook for you. :)
Drat, I would love one of these with 4 hooks but I don't own a 3D printer. Maybe one day I will. :-(
Shower cabin hook accessories
Mini filament spool and earring carousel stand
3D-printed scale model of EUR pallet (made of wood-based filament)
PET bottle to sparkling machine adapter (SodaStream-compatible)
Toilet Signs (3D-printable Dual-colour Modular Parts)
Hi,Nice design. I succesfully printed the spool holder. Works fine. What I still have not figured out is what the 2 small holes on top of the guide are ment for??
This is quite ingenious, and all the parts print and fit quite well (I didn't end up using the wheels as intended... just put them in the slot and no axle). However, the problem I'm having is one of physics... your video shows the filament coming nicely off in an arc and entering the filament holder at a nearly straight angle. In reality, as the spool spins, it ends up approaching the entrance to the filament holder at a much sharper angle, creating a point where the filament won't make the turn through the holder. I'm starting with a full roll (8" diameter, 1kg), so it's already as far out from the centre as it will get, and this situation only gets worse the smaller the radius of the remaining filament gets. Did you run into this, and did you figure out a way around it? Any chance you have a redesigned filament holder that is at a non-tangent angle to the spool? I wonder if using a small section of filament tubing on the intake side that arcs toward the filament roll would alleviate the issue?I printed all the parts on a Bukito3D (it was one of the first things I printed on my new printer!).
I would using a re-usable desiccant called drierite from www.drierite.com.Their indicating drierite is blue in color and turns red when it is wet. Heating in an oven for a short time will dry it and it will go back to blue. Initial cost is higher, but it becomes cheaper each time you dry it for re-use.
Vega - The LED-lit Christmas Star
Join 2 million + to receive instant DIY inspiration in your inbox.
Download our apps!
© 2016 Autodesk, Inc.