Tell us about yourself!
Electronics Crash Course
Beginning Leatherworking Class
hi,I am having difficulty following steps 18-22. Below are pics of my progress. Can you add some detailed instruction so I can complete this project?Thank you,Ruth
Slouch Alert Circuit
Name that Keychain
Setup and Print
Easy 3D Printing
Hi,I have connectivity with everything and the Feather is connected to bluetooth as I see a blue light on. When I press any switch on the sole nothing happens. Any suggestions?
Wonderful project! I was thinking of doing another infinity mirror but this time I would place the mirror at the bottom of a cylinder box. Then I would cut the height off the box. Also, do you think I could make this using an arduino uno on a much larger scale with triple the diameter?The instructions were excellent and this project is awesome!!
Project: Infinity Mirror
Conclusion & Going Further
Tools and Materials for Arduino
I forgot to save my first one so I redid it! Does it look like there is an extraneous circle on the top? I made the extra circle to get the extrude to work. Will this print ok?
LEDs and Lighting Class
3D Printing Class
Welcome to Arduino
Thanks for a great lesson!
Thanks for such a prompt reply! Actually, the battery is working now :)I have been sewing for a long time so that part was easy. I would like to try the next lesson with making sound. I am not sure if you can help me with this but I downloaded the most current version of arduino 1.6.12, but I don't know how to discard my old version of 1.6.8. When I open old arduino programs they come up with the old version. Thanks again for all your help! Great instructions!!
Wow, that was not simple! Thanks for such detailed instructions. Questions:When the circuit is attached with the USB cable only, should the LilyPad be switched to the on position or charge position?When the circuit is powered only with the battery should the LilyPad be switched to the on position or charge position?My circuit is working when it is attached to the USB cable but not working with the battery. I have charged the battery but still no success. Any suggestions?
Transfer Circuit to T-shirt
Great lesson! Can you tell me how to wire an on/off switch?
Reading Body Movement
When I sit up straight my numbers from the serial monitor range from 0-30. When I slouch the numbers go up to 500. Are the numbers we are seeing, voltage numbers? I thought when the flex sensor bends then the resistance increases, which would mean less voltage? Why am I seeing an increase in voltage when I slouch and the flex sensor is bending the most?Also, I have not been able to get any real range of different values by the shoulder placement. Any suggestions?
When I press down on the sensor or pull it taut, the light shines bright and the buzzer is off. When the sensor is not being touched or pulled taut the light is dimmed and the buzzer is buzzing.Is that the way the flex sensor should work?
It works! Thanks for a great lesson!
Introducing the Soft Switch
Introducing the Microcontroller + Arduino
Excellent tutorial!Looking forward to connecting with the arduino :)
Getting Started with Electronics
Excellent step-by-step instructions! How can I get it to move faster?
Tools and Materials
Wearable Electronics Class
Great instructions! I used poster board instead of the fly swatter and I glue gunned instead of using screws. I used my school's 3D printer to print the wheels. Onto the Sponge Bot!
Basic Electronics Skills for Robotics
Getting Started with Robots