loading
2CommentsJoined May 24th, 2016

Tell us about yourself!

Complete Your Profile
  • RobertP253 commented on ChengweiZ's instructable Pebble time watch Smartstrap Tutorial10 months ago
    Pebble time watch Smartstrap Tutorial

    Oh, sorry, I forgot to mention, I also got the pro micro driver installed, the sparkfun pro micro one, but that gets the program mode popup too. thx

    Heya, any chance you can help out with my attempt to get this working. I have a pro micro 5v and am trying to get this running, but if I tell it that its a teensy 2, arduino does the whole uploading thing, but then pops up the teensyduino box telling me to click the button. There is no button with the pro micro, so I short the reset and ground to emulate this. The light stops flashing (by default it apparently runs blinky ) but then after a pause it starts running the default program again. If i tell it that its an arduino micro, I get: "Teensy did not respond to a USB-based request to automatically reboot.Please press the PROGRAM MODE BUTTON on your Teensy to upload your sketch.", but again, shorting those pins doesn't help. This is arduino-1.6.7 . Any help would be greatly ...see more »Heya, any chance you can help out with my attempt to get this working. I have a pro micro 5v and am trying to get this running, but if I tell it that its a teensy 2, arduino does the whole uploading thing, but then pops up the teensyduino box telling me to click the button. There is no button with the pro micro, so I short the reset and ground to emulate this. The light stops flashing (by default it apparently runs blinky ) but then after a pause it starts running the default program again. If i tell it that its an arduino micro, I get: "Teensy did not respond to a USB-based request to automatically reboot.Please press the PROGRAM MODE BUTTON on your Teensy to upload your sketch.", but again, shorting those pins doesn't help. This is arduino-1.6.7 . Any help would be greatly appreciated, I have been banging my head against it for a few hours now. Thanks!

    View Instructable »