Tell us about yourself!
DIY Indoor Outdoor concrete lamp 2
Thank you very much for posting, and taking the time to document a great project. I am building at the moment and am having an issue similar to that mentioned below. I have changed all transistors to 3904 and when I switch it on all the LEDs blink without any audio.I have been troubleshooting and I believe the High pass filter is oscillating, if I ground the input to R17, the blue LEDs go out and the Green and Red respond as expected :) If I reconnect R17 on the high pass filter and add a 0.22uF cap from the junction of R17/C9 to GND, all seems to be well. But I suspect that alters the pass frequency of the filter. Can you suggest a better fix?Thanks.
RGB LED STRIP COLOR ORGAN (WITHOUT MICROCONTROLLER)
Make the Stargazer Viking Chair
Water Valve Light Switch for a Pipe Lamp
Homebuilt (DIY) CNC router - Arduino based (GRBL)
Ultrabright LED Emergency Lamp (Rechargeable!)
How To Make Your Own Sugru Substitute
Silicone/Oogoo Brain Slug from Futurama (Updated)
Programming Arduino with Another Arduino
Timeshifting Food – Pizza from Scratch
Wooden USB-powered RGB-LED lamp
Inside the Engineer's notebook- A guide to pictorial sketches