chrisparry
- Date Joined:Mar 18, 2008
- Instructables:1
- Total Views:136,203
- Featured %:100%
- Subscribers:28
- Comments:36
Instructables 
Achievements
Patches
chrisparry has not received any patches yet... send chrisparry a patch!
Comments 1-10 of 36(view all)
» hi
I actually use CAD/RPT in my work where and when it is required.
I just use it…
» Hi I also use CAD/RPT technology. I use Rhino3D. CAD/RPT has its uses bt this in…
» lol
» Supplies come from many sources but the biggest jewellery wholesaler in the UK is proba…
» The steps of making covering the wax in investment (which you cast into) is not shown. …
» It depends on the client. Some clients want a finished ring to be flawless, and others …
» You can create rings using CAD /RPT. In fact it is a technique I also use. Sometim…
» Hi The wax melts at about 70 deg c. The flask witht he wax in is put in a kiln for a…
» Hi A model making shop, or try ebay. you are after a 2 part RTV silicone rubber. …
» You are right. If the diamond were to be left in place, then the mould would capture…
» Hi I also use CAD/RPT technology. I use Rhino3D. CAD/RPT has its uses bt this in…
» lol
» Supplies come from many sources but the biggest jewellery wholesaler in the UK is proba…
» The steps of making covering the wax in investment (which you cast into) is not shown. …
» It depends on the client. Some clients want a finished ring to be flawless, and others …
» You can create rings using CAD /RPT. In fact it is a technique I also use. Sometim…
» Hi The wax melts at about 70 deg c. The flask witht he wax in is put in a kiln for a…
» Hi A model making shop, or try ebay. you are after a 2 part RTV silicone rubber. …
» You are right. If the diamond were to be left in place, then the mould would capture…
Orangeboard
2
comments
|
Add Comment
|
May 31, 2009. 11:20 AMTJ Nix
says:
Hey great job on the platinum diamond engagement ring, I want to make my girlfriend her engagement ring out of silver, any way you could tell me what I would need to do this in my own home? thank you very much - Nix
May 26, 2009. 8:24 AMPtGuru
says:
Well done. Be sure to cast Pt950/Ruthenium if you can. The Pt950/Iridium is way too soft and your ring will deform and scratch rapidly. cheers Jurgen
 |
