duct tape
- Date Joined:Dec 29, 2006
- Instructables:5
- Total Views:94,751
- Featured %:20%
- Subscribers:9
- Answers:1
- Best Answers %:100%
- Comments:330
Instructables 
Achievements
Patches
duct tape has not received any patches yet... send duct tape a patch!
Questions
 |
Best Answers
Comments 1-10 of 328(view all)
» See step three.
» It might be easier to cut the foam with a hot wire foam cutter, like this:http://www.in…
» Theoretically, it could be. http://en.wikipedia.org/wiki/Free-electron_laser
» It just isn't the same...
» try decreasing the angle that they spread apart. Like instead of
» Does it initially create a spark at the bottom?
» Sorry, 17.5 volts just won't cut it. You need at least a couple thousand volts to make …
» What type of tv is it? Can you take a picture of the transformer/tv?You can also use an…
» Would this configuration of the microcontroller/eeprom still work if you used a usb to …
» I used to use something like this years ago to make blasting caps, perhaps four or five…
» It might be easier to cut the foam with a hot wire foam cutter, like this:http://www.in…
» Theoretically, it could be. http://en.wikipedia.org/wiki/Free-electron_laser
» It just isn't the same...
» try decreasing the angle that they spread apart. Like instead of
» Does it initially create a spark at the bottom?
» Sorry, 17.5 volts just won't cut it. You need at least a couple thousand volts to make …
» What type of tv is it? Can you take a picture of the transformer/tv?You can also use an…
» Would this configuration of the microcontroller/eeprom still work if you used a usb to …
» I used to use something like this years ago to make blasting caps, perhaps four or five…
Groups
Orangeboard
11
comments
|
Add Comment
|
Sep 11, 2007. 9:40 PMtapan
says:
in netcat fun do you need nc.exe on the other omputer as well. plz help
please explain your set up to me, and I will gladly help you.
Sep 11, 2007. 9:45 PMtapan
says:
when i type telnet 192.168.1.2 4444 it says cannot open port 4444.connection failed. do i need to install nc.exe on the computer i am trying to connect.
are you on the same network as the computer you put nc.exe on? And did you use the batch file?
Oct 8, 2009. 2:12 PMgreenbean
says:
Im looking for some constructive critism. Youre almost a batch instructable legend. Please look at <a href="http://www.instructables.com/id/Freezing-lots-of-Computers-at-Once/">www.instructables.com/id/Freezing-lots-of-Computers-at-Once/</a> and comment and rate it! It's right down your alley.<br /><br />
Thanks for sharing your project, and welcome to Instructables!
Let me know if you have any questions.
You've probably already found your way around, but in case you haven't seen these, here's a guided tour of Instructables and an Instructable for making Instructables.
Let me know if you have any questions.
You've probably already found your way around, but in case you haven't seen these, here's a guided tour of Instructables and an Instructable for making Instructables.
 |
