With Instructables you can share what you make with the world, and tap into an ever-growing community of creative experts.
Super Secret Lock Box w/ Capacitive Touch
Ultrasonic Garage Parking Assistant with Arduino and an ATtiny85
I really like your project, but I can't seem to get your program uploaded to my ATtiny85 chip, I am able to upload smaller blink program, and test them, but your code will not upload. Do you have any suggestions, also I am up to IDE 1.6.9 if that makes any difference. Thanks in advance.
I made it also. However, I struggled a bit with the tiny digi board. I ended up just using an arduino uno, and old fashioned wall wart power supply. It works great. The sonar sensor is quite sensitive to the board I screwed it onto ( I just drilled out a piece of wood) . You can't let it touch the edge of the round emitter, or you get lots of bad readings. I used an old Hammond box, and added some blue tape for style.Thanks for the instructions !
I made it too. Used an addressable RGB LED which allowed any color from a single data pin. Thanks for posting this! The AtTiny85 bit was the best.
Hi, I have just completed this on the breadboard with the Attiny85 however I could not get it to work the green LED just stays on I have checked and recheck my wiring but could not get it to work need some help and direction to resolve this. Tried it with 2 different IC's but did not help. How can I confirm that the code was uploaded OK. Many thanks
Join 2 million + to receive instant DIY inspiration in your inbox.
Download our apps!
© 2016 Autodesk, Inc.