Tell us about yourself!

Complete Your Profile
  • tamosan commented on misan's instructable 4xiDraw1 month ago
    4xiDraw

    thanks İ will try that

    View Instructable »
  • tamosan commented on misan's instructable 4xiDraw1 month ago
    4xiDraw

    thank you it is very useful for me and solve the problem

    Hi, if you use the arduino cnc shield as on the step 4 photo ,you solder one wire to shown pin on the photo and connect the other end of the wire to + power input thats all ...

    Hi misan ,finally I managed to work the 4draw and try the sample codes on your github page.I think There is a last problem I have to solve ...it begins to start after sending the code and everything works properly but after a few seconds later it stops at the beginning of drawing, if your sample codes are not half or a part of drawing there is a problem I think,need your ideas , thanks.

    View Instructable »
  • tamosan commented on misan's instructable 4xiDraw1 month ago
    4xiDraw

    I think no lubrican needed , there was a post interested within ,maybe another problem is the cause of vibrating..

    yeah sure

    View Instructable »
  • tamosan commented on misan's instructable 4xiDraw1 month ago
    4xiDraw

    Hi Misan, or anybody else everyday I develop the project :) today both axis and servo begins to work with the sample gcode but the new problem is ; both x and y axis are overdriven even I changed the $100 and $101 to 80 ,how can I tell my 4axi it's limits and home position ? could anyone help ?

    View Instructable »
  • tamosan commented on misan's instructable 4xiDraw1 month ago
    4xiDraw

    Hi vertexeng,I think that there is a problem with https://github.com/cprezzi/grbl-servo for corexy ,because I upload the firmware and mechanics begins to work irregular just as the normal x,y axis way not a corexy mentality... and cann ot get gcodes from the laserweb software ? do you have any idea ?

    Thanks a lot

    Thanks a lot.

    Dear Misan ,today I try an example gcode with 4axi ,with an TAP extension file,X,Y axis works but servo does not .. any comment ?

    View Instructable »
  • tamosan commented on misan's instructable 4xiDraw1 month ago
    4xiDraw

    Dear Misan ,I activated both x,y axis from universal g code sender and also servo with M3 and M5 codes, but when I try to move from universal g code machine buttons by manual ,x and y axis works but servo does not move when push the Z axis button .is it normal ? or sth problem.And also cant get g codes from inkscape is it any plug in needed ? Thanks.Tamer

    And another question... in your hacked plugin python works on 32 bit,my computer is a 64 bit so do I have to use 64 bit python version (if there is one) and this hack still works on 64 bit ? do you have any idea ? thanks

    View Instructable »
  • tamosan commented on Aleator777's instructable Lunar Phase Clock6 months ago
    Lunar Phase Clock

    Excellent job bro.

    View Instructable »