A-600 "Low Ridah" Chopper
Intro: A-600 "Low Ridah" Chopper
Check my Stuart W.R. V4 too!
I used all my inspiration sources (American Chopper, Biker-Build Off, etc.), and came up with this:
The A-600!
It's the V2 of the A-400, a sports bike I made a while ago.
Used a lot of bendies for the design, but it's still pretty solid.
I don't really have anything else to notify you of, so here's the ups and downs.
Pro's:
- Low piece use.
- Suspension at the back.
- Nice and chromy... hmmmmm... chrome...
- Instant chick magent :3.
No's:
Rare part use.
I used all my inspiration sources (American Chopper, Biker-Build Off, etc.), and came up with this:
The A-600!
It's the V2 of the A-400, a sports bike I made a while ago.
Used a lot of bendies for the design, but it's still pretty solid.
I don't really have anything else to notify you of, so here's the ups and downs.
Pro's:
- Low piece use.
- Suspension at the back.
- Nice and chromy... hmmmmm... chrome...
- Instant chick magent :3.
No's:
Rare part use.
STEP 1: Rear Wheel Mount + Wheel
Just what it is..
Pretty easy..
Pretty easy..
STEP 2: Rear Fender + Seat Support
Again, just what it is..
STEP 3: Seat
You probably shouldn't sit on it, but a K'nex puppet could..
STEP 4: Steering Colom
Again.. again, just what it is..
STEP 5: Steer
The steering bars.. nothing else..
STEP 6: Front Wheel + Bars
The front of the bike, very hard.. even i had trouble with it, and i'm the creator!
STEP 7: The Backbone
Something i lack sometimes..
STEP 8: Engine Mount
Again.. again.. AGAIN, just what it is.
STEP 9: Assembly
Pic 01: Backbone + Engine Mount.
Pic 02: Attach.
Pic 03: Seat Support & Fender + Engine Mount.
Pic 04: Attach.
Pic 05: Seat + Seat Support & Fender + Backbone.
Pic 06: Attach.
Pic 07: Steering Colom + Front Wheel & Bars.
Pic 08: Attach.
Pic 09: Steer + Front Wheels & Bars.
Pic 10: Attach.
Pic 11: Steering Colom + Backbone.
Pic 12: Attach.
Pic 13: Rear Wheel Mount + Engine Mount.
Pic 14: Atach.
Pic 02: Attach.
Pic 03: Seat Support & Fender + Engine Mount.
Pic 04: Attach.
Pic 05: Seat + Seat Support & Fender + Backbone.
Pic 06: Attach.
Pic 07: Steering Colom + Front Wheel & Bars.
Pic 08: Attach.
Pic 09: Steer + Front Wheels & Bars.
Pic 10: Attach.
Pic 11: Steering Colom + Backbone.
Pic 12: Attach.
Pic 13: Rear Wheel Mount + Engine Mount.
Pic 14: Atach.
STEP 10: You're Done!!!
Well.. well.. well..
Are ya happy with your new chopper!?
I sure hope so, have frikkin' much fun!
Are ya happy with your new chopper!?
I sure hope so, have frikkin' much fun!
100 Comments
Lowney 14 years ago
Skreetsha 14 years ago
Snap- o_0
I guess so.. lol.
Lowney 14 years ago
Skreetsha 13 years ago
squarepants 14 years ago
Lowney 14 years ago
www.instructables.com/id/Knex_car_with_suspension/
So why can't trained specialist builders work similar magic lol?
Skreetsha 14 years ago
Lowney 14 years ago
Skreetsha 14 years ago
GTRPLR1995 13 years ago
TSC 13 years ago
barrax 14 years ago
Killer~SafeCracker 14 years ago
barrax 14 years ago
Killer~SafeCracker 14 years ago
NYPA 14 years ago
smilee 14 years ago
NYPA 14 years ago
Killer~SafeCracker 14 years ago
NYPA 14 years ago