Arduino Pong Game
Intro: Arduino Pong Game
breadboard
2 buttons
.96" OLED color display
12 wires
Arduino RedBoard
STEP 1: Instructions
1. Place oled as you see in the picture above.
2. Wire placement (from Arduino to breadboard)
Connect a wire from GND to the negative of the bread board.
Take 2 wires from the negative to one side on each button.
plug 2 to the other side of one of the buttons.
plug 3 and put it to the other side of the other button.
negative to the GND port on the screen.
3.3v plug to the vcc outlet from the screen.
plug 8 to dc outlet on screen.
9 plug to the res outlet.
plug 10 to cs screen outlet.
plug 11 to sda screen outlet.
plug 13 to scl screen outlet
Comments
audreyobscura 4 years ago