B.Z.A.R.

by Big Z

2.1K1254

Intro: B.Z.A.R.

This is my Assault Rifle, the BZAR. It features a removable speed loading mag, meaning that the mag can be pre-loaded, and then inserted into the gun. The Speed Loading part means that the mag can be loaded without ever taking out the pusher, or pulling off the bands. This makes this gun extremely fast to reload; just pull off the empty mag, and clip in a new one. Plus, if you're out of mags, they're easily reloaded, or you can just push four more bullets into the chamber, and use it as a micro-mag.

Features:

  • Size: 15.2" x 5.9"
  • Range: ~ 30-40 ft.
  • Accuracy: Consistent
  • Pc. Count: Med. High
  • Mag Size: 7 (11 with extended mag)

STEP 1: Handle and Trigger

This is my all new handle, designed with comfort in mind.

1. Build these.
2. And these
3. Attach here.
4. Add the final layer.

STEP 2: Chamber

This is the camber, where the bullets go into the gun, and where the mag attaches.

1. Build these.
2. Add these.
3. Put it together.
4. Attach here.
5. Add this.

STEP 3: Body and Barrel

This is the body and barrel. The barrel is integrated into the body, providing more accuracy.

1. Build these.
2. Put it on.
3. Add third layer.
4. Add this.
5. Attach here.

STEP 4: Mag

This is the speedloading removable mag.

1. Build these.
2. Put these on.
3. And finish it off.

STEP 5: The Rest

Sight, Ram, And Mag Push

Sight:
1. Build it.
2. Put these in.
3. Put it on here.
Ram:
4. Build it.
5. Put it in Here.
Mag push:
6. Build it.
7. Put it in here.

STEP 6: Bands

Where to put bands.

1. Here
2. Here
3. And Here

STEP 7: Loading

How to load and fire the gun.

1. Pull down the pusher, and insert a rod.
2. Hold the bullet here.
3. And push it in. (load seven)
4. Once loaded, clip in this side of the mag.
5. And then this side.
6. Now pull out the pin.
7. Now pull back the ram, to cock it.
8. And pull the trigger to fire.

STEP 8: Finished!

You're done! I hope that you have as much fun with this as i have.

Special Thanks To:

  • Me
  • My brother
  • NikAwesome
  • Me
  • My Dog
  • The Tick
  • And Finaly, Me.

Stuff To Do:

  • Shoot your friends
  • Shoot your relatives!
  • Shoot a stranger
  • Rate it five stars
  • Stop a terrorist attack
  • Add it as a favorite
  • Build my other guns
  • Subscribe to Me

54 Comments

The cameraman 11 years ago

I broke one of the white connectors like in step 1 BEFORE I built this

LittleBilly 5 years ago

Me too ( and not just one either )

james4 13 years ago

i know what b.z.a.r. stand for big z's assault rifle

matsermetsuiker 14 years ago

 good gun!
but the gun isn't good for long range shots
4,5#

Big Z 14 years ago

Thanks man! Try putting a couple more bands on for extra range, it can handle a fair amount of pressure.

rootbeer96 13 years ago

i made iron sights mad beast u have pistol sights or rifle by one attachment

Merugop 14 years ago

 lol i cant get the ramrod in place with 6 rbs

mettaurlover 13 years ago

Actually, you could make a stock that slots into the bottom of the handle if you make it completely hollow in there, and have the grey two-slot be a yellow to attach it firmly.

mettaurlover 13 years ago

Made one; I now have a slightly oversized pistol-I only made it to the mag and a white and red past that so it has some accuracy. Great range, but I'm almost out of parts to use as ammo due to mag size.

K1TK4T 117 14 years ago

oh btw my old account was jackdb1998

K1TK4T 117 14 years ago

today was the sad day when i had to take this apart :( :( :( :(. ive made better things like the ZLG, The MeZak oodamo pistol  and the ZKAR (all off KI)

Raikou-san 14 years ago

How did I miss this? Might build soon.

Prranavan 14 years ago

nice gun i really want to make it but i dnt hav enough pieces coz i have used them for my V8 engine gonna get more so hopefully i will make it then  anyway great gun. 5*

An Villain 14 years ago

awesome chamber, this boosts my rating.

jackdb1998 14 years ago

best gun that I've made!!! I have been looking for a gun with a mag like this for weeks

Big Z 14 years ago

Thx, i'm glad you found one!

jackdb1998 14 years ago

ive recently been running low on knex pieces cos i have used loads on my new chain gun turret and i have taken apart nerly all of my other guns but i refuse to dismantle this bcos its just sooooo gooood!

if u havnt made it yet then  make it now
More Comments