CNC Machine With Camera and LED Backlight

Intro: CNC Machine With Camera and LED Backlight

Bill of material:

Electronic parts:

1pcs Power Supply 24V 15A 360W 25,68€

1pcs 5Axis CNC Interface Adapter Breakout Board For Stepper Motor Driver 8,14€

3pcs TB6600 steper motor driver controller 23,72€

3pcs Stepper motor 1,8° 86,01€/set

1pcs Emergency Stop Push Button Switch AC 660v 10A 4,64€

1pcs wireless black controller gaming USB receiver adapter for xbox 360 6,12€

1pcs HD 720p Brand USB endoscope borescope snake scope wire camera 14,59€

2pcs 72 led flexible strip led 30cm 9€

1pcs mini wireless RF LED controller for led strip light 2,13€

The total price of the electronic part 180€ (205 USD)

Mechanical parts:

2pcs SBR16-300mm rails

2pcs SBR 16-600mm rails

2pcs SBR 16 -1000 mm rails

12pcs SBR16UU blocks

3sets BK12/BF12 with locknuts and circlips

3pcs DSG16H nut housing/bracket

3pcs D25-L30-6.35*10mm coupling

2meter Energy chain for cnc machine 17,32€

The total price of the mechanical part 420€ (478 USD)

STEP1: Mechanical part CNC

STEP2: Electronic part CNC

STEP3: Motor tuning

STEP4: Mach3 setup

STEP 1: Mechanical Part CNC

STEP 2: Electronic Part CNC

STEP 3: Motor Tuning

STEP 4: Mach 3 Setup

Comments

[sharafi100]

hi sir dear
How do I download the software? To adjust the motors

[Iokap]

dear when the blue cable connected to tb6600 causes the motor stops. some settings for p14 enable pinout.

[azharali.69786]

Hye I want to know that this cnc 5 axis board can be use for vectric aspire

[JTracker]

I know this is an old project (that I hope is still being viewed), but I
am hoping you have some CAD files that you could share on this project -
in lieu of the pdf drawings.

[RomiG4]

Mach3 PC use windows 7 32bit ?

[digitalkitsaudio]

Z AXIS PDF NOT INCLUDED SEND TO PDF Z AXIS

[RomiG4]

Z axis part...

[BillB285]

Táto elektronika by sa dala použiť na hotovej mechanike?
Frézujeme s tym drevo 2,5D-3D
A urobíte mi to?

[haglund]

What about the ball screw? i Can't find them in the Mechanical parts list..

Would be great if you could update the list.. Brgds..

[amjadpksbp]

What about the ball screw? I could find the length and specification of the rod length? Please confirm.

[IzakT]

Sleek design. I notice you are using a Makita router. Which model? I am having a hard time sourcing the popular Dewalt DWP611 locally and Makita may be easier to source.

[CNC Martin]

I am using Makita 3710 and I am satisfied with it.

[Esmail Bauomy]

Makita 3710 working with Aluminum?

[DamonD2]

One of the best DIY CNC I ever seen. I really like your design and I'm considering building one. can you please share the frame schematic as well as the material you use to build it. thank you

[DorisC28]

We are specialized in linear rails for CNC machine, welcome to your enquiry. For more information, please visit www.ccmrails.com

[IzakT]

Thanks for the info. Seems that specific model is also not available locally but they do have the RT0700C 710Watt model as a viable option. 

Now to start putting the shopping list together :)

[DorisC28]

We are specialized in linear rails for CNC machine, welcome to your enquiry. For more information, please visit www.ccmrails.com

[DorisC28]

We are specialized in linear rails for CNC machine, welcome to your enquiry. For more information, please visit www.ccmrails.com

[badhat70]

What CNC software did you use with your build?

[TheThinker]

Elegant design! I'm considering building one. What would you have done differently if you were to build it again?