Cutting Board - I MADE IT AT TECH SHOP
Intro: Cutting Board - I MADE IT AT TECH SHOP
Make your very own cutting board!
STEP 1: Bill of Materials
1) Wood Glue
2) Any Variation of 1/2" thick hardwood you like, based on the pattern you would like to create.
2) Any Variation of 1/2" thick hardwood you like, based on the pattern you would like to create.
STEP 2: Cut Wood Into 1/2" X 16" Strips
On the table saw, but strips of wood.
STEP 3: Laminate Wood
In this step you will be laminating 20 of the strips together. Arrange the strips in a pattern of your choice. Apply wood glue on side surface, and clamp. Read instructions on wood glue bottle to see how long the glue needs to cure.
STEP 4: Cut Board Down
On the table saw, cut the board into any shape and proportion you like.
STEP 5: Sand and Finish!
For the finishing process, sand down the wood, then with a rag, apply mineral oil. Do not use any other finish as the mineral oil is non-toxic.
3 Comments
Kwabena ofosu 6 years ago
This look very nice I would like to make one but I do not have table saw
Penolopy Bulnick 11 years ago
oldmicah 11 years ago