Dead Ringer Head Set Hack
Intro: Dead Ringer Head Set Hack
I really enjoy using Skype but wanted to keep the feel of using an old fangled phone and give my friends a good laugh when they saw me through video chats, so I made this device.
What you'll need is an old telephone (the ones with the big metal ringers inside them and the twirly knobs) but all we're gonna use from that is the "headset" the twisty cable and the female plug from the phone with about two inches of it's wires still attached (mine were red, green, yellow, and black)
and to finish it of you'll need two mono male 1/8 audio jacks if you do what I did, but i imagine you could do this another way to.
right now the receiver is a little quite (cause it's not up to line level, but that's for a later time).
What you'll need is an old telephone (the ones with the big metal ringers inside them and the twirly knobs) but all we're gonna use from that is the "headset" the twisty cable and the female plug from the phone with about two inches of it's wires still attached (mine were red, green, yellow, and black)
and to finish it of you'll need two mono male 1/8 audio jacks if you do what I did, but i imagine you could do this another way to.
right now the receiver is a little quite (cause it's not up to line level, but that's for a later time).
STEP 1: Soldering
So really all you have to do is solder the right wires togeather i tested with a mono jack that had been cut from a longer cord and twisted the wires togeather and used some robin williams from my ipod.
for me red and geen when to the speaker (top)
and yellow and black to the reciver (bottom)
hence i have the receiver as a red and the speaker as black port
I promise my next instructable will be more through, but I've been making things for a very long time and just decided on a whime to do this, I'd apreciate any positive feedback, and let me know how this goes if you to make one of these, or already have.
for me red and geen when to the speaker (top)
and yellow and black to the reciver (bottom)
hence i have the receiver as a red and the speaker as black port
I promise my next instructable will be more through, but I've been making things for a very long time and just decided on a whime to do this, I'd apreciate any positive feedback, and let me know how this goes if you to make one of these, or already have.
13 Comments
d1ndian 13 years ago
djr6789 15 years ago
toogers 14 years ago
djr6789 14 years ago
toogers 14 years ago
djr6789 14 years ago
tap 15 years ago
Bratton 15 years ago
Bratton 15 years ago
Hycro 15 years ago
pieloveralex 15 years ago
randofo 16 years ago
https://www.instructables.com/id/Telephone-Handset-Microphone/
Derin 15 years ago