Felt Bear
Intro: Felt Bear
There are a person good at sewing and a weak person.
I thought if anyone could let a thread go through equally that I was glad, and made it with a laser cutting machine.
I thought if anyone could let a thread go through equally that I was glad, and made it with a laser cutting machine.
STEP 1: Create the Data
The point of the data making...
1.
When I process felt, limit width occurs around 1.5mm(In the case of felt of 2mm).
So, it is necessary to offset a pass 0.75mm beforehand.
2.
I make a dashed line from the pass which offset in the 0.5mm inside.
STEP 2: Cut the Felt
Process by using a laser cutting machine.
The felt to process with a laser cutting machine has good thing of 100% of polyester.
The felt to process with a laser cutting machine has good thing of 100% of polyester.
STEP 3: Sew
I was able to sew straight it with equal distance when I put a thread in conformity to the hole which a machine opened.
9 Comments
Whovian123 7 years ago
nice!!!
sabu.dawdy 10 years ago
SaoriSHINYAMA 10 years ago
sunshiine 11 years ago
sunshiine
SaoriSHINYAMA 11 years ago
Next, I want to change how to sew and use the shining thread.
MonkiMan 11 years ago
SaoriSHINYAMA 11 years ago
Penolopy Bulnick 11 years ago
SaoriSHINYAMA 11 years ago
Wish thought so that even the person who was weak in sewing could sew it neatly.
If it is this method, any development is possible.