How to Make the Super OmniDelta Paper Airplane
Intro: How to Make the Super OmniDelta Paper Airplane
A fast, long range, flying wing paper airplane, the Super OmniDelta is a fin-less development of heavyfire88's Outsider paper airplane.
TAA USAF Designation: F205-1
TAA USAF Designation: F205-1
STEP 1: Materials
Required:
1 Piece of 8.5 by 11 inch paper
Tape
Pencil
Ruler
1 Piece of 8.5 by 11 inch paper
Tape
Pencil
Ruler
STEP 2: Width and Corner Folding
To begin, fold your paper in half along its width. Once it is folded in half along its width, pull the corner folds down.
STEP 3: Nose and Corner Folding
Pull the tip of the nose back so that this tip lies 1 inch in front of the trailing edge. Then pull the corners in once again as shown.
STEP 4: Taping
Tape your Super OmniDelta's airfoil sections down at their rears as directed.
STEP 5: Flight
The Super OmniDelta is a fin-less flying wing which needs precise launches to achieve great flights. To launch your Super OmniDelta, hold it near its center as shown and advance it through the air at a moderate speed and release. This should result in an impressive flight reaching ~50 feet or more!
Enjoy!
Enjoy!
4 Comments
Lil C 12 years ago
OrigamiAirEnforcer 12 years ago
patriots8888 12 years ago
Robert E Rogers 12 years ago