Infrared LED Flashlight
Intro: Infrared LED Flashlight
This flashlight uses High-Output Infrared LED's that seems invisible to the naked eye, but when seen on camera, it shows as working LED's. It is also the first Infrared Instructables posted.
STEP 1: Materials
1. 6-LED flashlight
2. 6 High-Output Infrared LED's (RadioShack)
3. Soldering Iron
**This can work with any LED flashlight**
3. Soldering Iron
**This can work with any LED flashlight**
STEP 2: First...
Take apart the flashlight.
STEP 3: Second...
1. Locate the circuit board and De-solder the 6 white LED's
2. Solder in the 6 High-Output Infrared LED's being careful to check the polarity
2. Solder in the 6 High-Output Infrared LED's being careful to check the polarity
STEP 4: Lastly... Assemble the Flashlight!!!
Assemble the flashlight!!!
You now have an Infrared flashlight that can only be seen on camera . . . what will you do with it?!
You now have an Infrared flashlight that can only be seen on camera . . . what will you do with it?!
28 Comments
PetraP1 9 years ago
Needed to be shown the circuit board & how-to. Ah well....
michaelgc 9 years ago
This is great, seems simple enough... now just figuring out what I will do with it if I made it...
shaggydoo121 10 years ago
KingOfCatfish 13 years ago
amalfitano 13 years ago
Shadow13! 13 years ago
BrefelanDesigns 12 years ago
lfletch62 11 years ago
Shadow13! 13 years ago
MadScientist101 13 years ago
aradi 13 years ago
amalfitano 13 years ago
aradi 13 years ago
dark sponge 13 years ago
amalfitano 13 years ago
dark sponge 13 years ago
eralon 13 years ago
kelseymh 13 years ago
Kryptonite 13 years ago
amalfitano 13 years ago