Knex Suspension Buggy
Intro: Knex Suspension Buggy
A knex buggy using slightly modified suspension from gunner1089's instructable.
STEP 1: The Parts
collect all necessary parts which are as followed:
34 Y rods
12 Blue End Connectors
36 Grey Single slot Connectors
14 Grey 45º Connectors
18 Brown Straight 180º Connectors
17 Grey 180º Connectors
26 Green 135º Connectors
4 Beige Locking End Connectors
8 Black 360º Connectors
10 Blue Snap-Together Connectors
52 Grey Snap-Together Connectors
24 Silver Spacers
42 Blue Spacers
6 Grey 90º Connectors
115 Black Rods (1.75 cm)
68 Silver Rods (3 cm)
30 Blue Rods (5.5 cm)
2 Green Rods (13 cm)
4 Wheels
1 Steering Wheel, or Small Grey Gear
34 Y rods
12 Blue End Connectors
36 Grey Single slot Connectors
14 Grey 45º Connectors
18 Brown Straight 180º Connectors
17 Grey 180º Connectors
26 Green 135º Connectors
4 Beige Locking End Connectors
8 Black 360º Connectors
10 Blue Snap-Together Connectors
52 Grey Snap-Together Connectors
24 Silver Spacers
42 Blue Spacers
6 Grey 90º Connectors
115 Black Rods (1.75 cm)
68 Silver Rods (3 cm)
30 Blue Rods (5.5 cm)
2 Green Rods (13 cm)
4 Wheels
1 Steering Wheel, or Small Grey Gear
STEP 2: The Suspension
The Suspension System from gunner1089
STEP 3: The Front Half of the Buggy
The front half of the buggy
STEP 4: The Body of the Buggy
The body to hole the steering wheel and other miscellaneous figure ex: a seat, a doll
STEP 5: The Rear Suspension System
The rear suspension, and the bumper
STEP 6: The Roof
the final step, the roof
STEP 7: Optional Suspension Mod
please follow this link for a detailed instruction on how to build gunner1089's new suspension: https://www.instructables.com/id/SCLSYMCFIG8WL9R/
to incorporate it into the previously built buggy, just take of the bumper, remove the "old" suspension, put a silver spacer, a blue spacer, the suspension, then
(1 rear suspension) a blue spacer then a silver spacer, the reattach the back bumper.
(2 front suspension) two blue spacers, the connected 135 degree green connectors, then the front bumper
to incorporate it into the previously built buggy, just take of the bumper, remove the "old" suspension, put a silver spacer, a blue spacer, the suspension, then
(1 rear suspension) a blue spacer then a silver spacer, the reattach the back bumper.
(2 front suspension) two blue spacers, the connected 135 degree green connectors, then the front bumper
STEP 8:
After many months of collecting dust, I extensively modded it.
Comments are welcome.
Picture 1 ~ Right side view
Picture 2 ~ Front End
Picture 3 ~ Left side
Picture 4 ~ Rear end view
Comments are welcome.
Picture 1 ~ Right side view
Picture 2 ~ Front End
Picture 3 ~ Left side
Picture 4 ~ Rear end view
39 Comments
the_boss_builder 12 years ago
cutler27 13 years ago
qwertyuiopasdfghjklzxcvbn 13 years ago
binglebeebop 13 years ago
smilee 14 years ago
SpeedStrikerXLR 13 years ago
supah4x0r 13 years ago
nathan.savino 14 years ago
Thanks this suspension system works great and i to have kept it made for many months because i just really don't want to see it taken apart for something else. And i have also modded mine a bit. i have addes people and seats lights an awsome wing, some plain back lights and othe minor upgrades. this is by far one of my favourite vehicles to make from knex
garrys newman 14 years ago
seriously, good work
AkramShaikh9 14 years ago
binglebeebop 15 years ago
Dante9030 14 years ago
binglebeebop 14 years ago
https://www.instructables.com/id/Knex-Rear-Suspension/
https://www.instructables.com/id/Knex-Rear-Suspension-2/
maria13 14 years ago
binglebeebop 14 years ago
Knexxyboyz 15 years ago
Oblivitus 15 years ago
binglebeebop 15 years ago
Oblivitus 15 years ago
Flumpkins 15 years ago