K'nex Bike
Intro: K'nex Bike
A simple bike made out of K'nex. It would have been a larger, two-speed model, but I couldn't get a hold of any of those larger yellow gears. I also don't have enough bendy rods, so this bike is made with 100% old school pieces. It has an adjustable seat and handlebars.
STEP 1: Gather Materials
Connectors
- 5 White
- 36 Yellow
- 45 Orange
- 16 Green
- 4 Red
- 4 Light Grey
- 16 Grey
End Connectors
- 16 Brown
Rods
- 4 Black
- 9 Grey
- 27 Red
- 2 Yellow
- 4 Blue
- 65 Green
Miscellaneous
- 2 Red Gears
- 12 Blue Spacers
- 26 Black Chain Link
- 1 small rubber band
Motors and Wheels
- 2 Small Tires
- 5 White
- 36 Yellow
- 45 Orange
- 16 Green
- 4 Red
- 4 Light Grey
- 16 Grey
End Connectors
- 16 Brown
Rods
- 4 Black
- 9 Grey
- 27 Red
- 2 Yellow
- 4 Blue
- 65 Green
Miscellaneous
- 2 Red Gears
- 12 Blue Spacers
- 26 Black Chain Link
- 1 small rubber band
Motors and Wheels
- 2 Small Tires
STEP 2: Wheels 'n Things
Build the wheels, support struts and supporting components. The wheel shown is the front wheel. The back wheel is different, so build the wheel without the supports for the back one. The wheels are a tad weak, but you can substitute yellow bendy rods in place of the orange connectors to form the curve.
STEP 3: Front Portion
Keep on building!
STEP 4: Gears 'n Things
Build the gears 'n things. The brakes are nonfunctional for now, but I'm planning a two-speed model once I can get some yellow gears. If you can get the brakes working, please post a picture!
40 Comments
edwardnowalski 2 years ago
KNEX-pert 12 years ago
starwarsjedi76 12 years ago
BalintRules 15 years ago
myles126 13 years ago
KnEx_MaStEr 13 years ago
ross007 14 years ago
Lowney 14 years ago
dsman195276 15 years ago
erikos kostarikos 14 years ago
DrWeird117 15 years ago
crestind 15 years ago
dsman195276 15 years ago
erikos kostarikos 14 years ago
knex obsessed 15 years ago
Dirtyboyy 15 years ago
PineapplebobTheGreat 15 years ago
Trauts 15 years ago
Bartboy 15 years ago
DrWeird117 15 years ago