LEGO Display
Intro: LEGO Display
Every time my son gets a new LEGO set he builds it, plays with it, and then throws it in a tote with all of his other LEGO sets. All the parts get jumbled together and the possibility of ever putting the model back together drops with each new set.
This Christmas I decided to try and stop that cycle by creating some shelves for his room to display the completed models and while I was at it I created a shadow box to display some of his favorite minifigs.
The shelves are just a wooden box made with 1" pine. This is a three foot shelf so each section is 12" wide and 10" tall.
For the minifig display in the middle I used 1/4" MDF cut to the dimensions of the opening. I then painted the MDF and used Gorilla Glue to affix LEGO bricks to the MDF. The minifigs snap onto the bricks and he can swap them out as he wishes.
This Christmas I decided to try and stop that cycle by creating some shelves for his room to display the completed models and while I was at it I created a shadow box to display some of his favorite minifigs.
The shelves are just a wooden box made with 1" pine. This is a three foot shelf so each section is 12" wide and 10" tall.
For the minifig display in the middle I used 1/4" MDF cut to the dimensions of the opening. I then painted the MDF and used Gorilla Glue to affix LEGO bricks to the MDF. The minifigs snap onto the bricks and he can swap them out as he wishes.
8 Comments
nice sister 10 years ago
knj5306 10 years ago
I used an extra brick as my spacer, so there is a 2X8 brick space between each one. As far as height goes, just eyeball how much space you want between the rows.
nichlas 10 years ago
Penolopy Bulnick 11 years ago
mh76dk 11 years ago
That tote should be where your kid looks and come up with his own magic ideas. The idea of LEGO is to keep playing with it, keep using your imagination. Not to "build the packaged set and move on" - if that is how it is today im feeling very sad.
knj5306 11 years ago
flapper501 11 years ago
mikeasaurus 11 years ago