Not So Throwable L.E.D. Generator
Intro: Not So Throwable L.E.D. Generator
simple project that can be used to show the capabilities of wind energy
or just as a simple momentary flashlight.
or just as a simple momentary flashlight.
STEP 1: Materials
you will need a :
L.E.D.
a small hobby motor
L.E.D.
a small hobby motor
STEP 2: Tools
you will need a:
soldering iron
solder
snips / scissors
soldering iron
solder
snips / scissors
STEP 3: The Easiest Step
solder the led to the motor, polarity does not matter since the polarity given off by the motor switches with a change in rotational direction.
STEP 4: Tips
possible applications for this include:
momentary flashlight
placing on a small propeller to demonstrate the potential of wind energy
a tachometer, the brighter the led is the faster the shaft is spinning
momentary flashlight
placing on a small propeller to demonstrate the potential of wind energy
a tachometer, the brighter the led is the faster the shaft is spinning
51 Comments
stonehenge360 16 years ago
firemanfu 16 years ago
bomberman3 15 years ago
munymuny200 13 years ago
seandogue 14 years ago
firemanfu 15 years ago
Jack A Lopez 13 years ago
Kante Tech 13 years ago
masprotech 14 years ago
masprotech 14 years ago
ac1D 16 years ago
MJTH 15 years ago
nevery 15 years ago
awkrin 15 years ago
hoihoi151 15 years ago
Sandisk1duo 15 years ago
firemanfu 15 years ago
mr.dr.prof.joel 15 years ago
mr.dr.prof.joel 15 years ago
Sandisk1duo 15 years ago