Cheap Prosthetic Hand for Playing Basketball
Intro: Cheap Prosthetic Hand for Playing Basketball
A cheap, and simple solution for people whose insurance doesn't pay for activity specific prosthetic's.
STEP 1: First Mark the Line
First mark the line, pretty close to in the pictures. You can make it bigger, but it might get in the way of your shooting hand (right hand in my case).
STEP 2: Cut on the Line
Now cut on the line,don't worry if it's too big now.
STEP 3: Make Line for Hole for Hook
Now the placement for this line will depend on if its left, or right handed. This is right handed, so the line would go on the other side of the lip for left.
STEP 4: Cut the Hole
Getting the hole the correct size may take a little time. Start small, you want it as tight as possible. I used a new razor blade for my cuts.
STEP 5: Tape It On
I just used 3m duct tape to attach it. It was surprising strong and sturdy.
STEP 6: Final Trim
Now just go to a basketball court and take a few practice shots. If the lip is too big cut it back in really small amounts. It still needs to hold the ball, but not interfere with your shooting hand. Good luck!
Version 2 coming soon!
8 Comments
zman1204 9 years ago
wirenut1980 9 years ago
Thank you for following me!
michael123d 9 years ago
Anyone can do things as useful as these, but people need ideas. And you've got them. Good job
edbeaty 9 years ago
tankapotamus 9 years ago
radiograf 9 years ago
Nice to see you proving that where there is a will there is a way.
karrman1984 9 years ago
Way to over come! keep up the good fight!
rimar2000 9 years ago
Very clever!