Moss Bombs
Intro: Moss Bombs
Make some simple moss bombs to throw at buildings and add some living green to your urban cement-scape.
STEP 1: Find Your Moss
Moss can be found in all sorts of corners. I found mine near an abandoned pool. You can also find it online, though expensive, at mossacres.com
STEP 2: Gather Ingredients
You'll need:
6 cans of beer. (3 for your bombs, 3 for yourself)
1 box of sugar. (1/2 table spoon per can of beer)
bag of rubber balloons (heavy duty kind will prevent an explosion on your face)
moss (that you collected
acrylic paint (optional)
also:
1 blender
mixing pot
targets
empty soap bottle (to inject solution into balloons) or basting sirynge
empty plastic bottle (or funnel)
6 cans of beer. (3 for your bombs, 3 for yourself)
1 box of sugar. (1/2 table spoon per can of beer)
bag of rubber balloons (heavy duty kind will prevent an explosion on your face)
moss (that you collected
acrylic paint (optional)
also:
1 blender
mixing pot
targets
empty soap bottle (to inject solution into balloons) or basting sirynge
empty plastic bottle (or funnel)
STEP 3: Grind Moss
Add the moss slowly into a coffee grinder, or blender if you have one. Grind it slowly, because there will be some small rocks that may damage the blender blade or your eye.
STEP 4: Mix Ingredients
Throw the beer, moss, and sugar into a large pot and stir it around.
STEP 5: Add Paint and Moss
Now comes the hard part. Cut the top off of a plastic bottle or grab a funnel and attach the mouth of the funnel to a balloon. Now pour your paint into the funnel and fill balloon about half full in it's collapsed state. (we'll inflate it with our mixture next)
STEP 6: Pour Moss Mixture Into Balloon
This step is a messy one. Pour the mixture of beer and moss into a plastic soap bottle ( or better yet, a basting syringe). Attach the balloon to this and then squeeze the bottle to fill up the balloon. Watch the balloon as it fills to prevent it from exploding.
STEP 7: Inflate
Now i might be best to accept that you probably eat sugar, eat lettuce (moss), and drink beer b/c this step is kind of gross but simple. Just inflate the balloon with your mouth to add more size so that the balloon will pop better when it hits a wall. Then tie of the balloon with an overhand knot.
STEP 8: Go Outside
Now just repeat these steps for each balloon, and then go outside and launch them. Hopefully within a few weeks the moss will grow into the shape of the exploded splash with some nice moss drip marks.
( north walls tend to be better spots for moss to grow)
this project used ideas and resources from :
green guerrilla's green guerrilla's and moss graffitimoss graffiti
( north walls tend to be better spots for moss to grow)
this project used ideas and resources from :
green guerrilla's green guerrilla's and moss graffitimoss graffiti
50 Comments
low-key lysmith 11 years ago
souleaterVS 8 years ago
Just color, for fun.
Mr. Deeds 16 years ago
Madrigorne 11 years ago
kikiclint 14 years ago
waynevanwijk 14 years ago
Then blow up the balloon to the desired size, twist the neck a few times to stop the air escaping and then stretch the neck of the balloon over the bottle opening. The balloon will stay inflated.
Turn the whole lot upside down and the contents of the bottle will fall into the balloon. Remove the still inflated balloon and tie it off.
I figured out this method whilst making about 300 balloon and birdseed style juggling balls. In fact, I should make an instructable of this.
Madrigorne 11 years ago
spark master 12 years ago
Consider getting your cities to make more green space parks and kill people who destroy them.
Oh BTW , in the summer, since I was maybe 8, we city kids would have water balloon fights. My parents (et al), would flip if we ran the hose too much. We filled a big bucket with water, from it we filled glass soda bottles, (lord I am ancient), we simply inflated the balloon and pulled it (carefully ) over top of a water filled soda bottle to just below crown (no screw tops) then holding the balloon on the neck , inverted them.
Air goes up, liquid goes down. Never had an issue. After 2-3 never lost a balloon. If you want way more air then only put a little sludge water, whatever, and fill the balloon a tad past where you want it. (Newbies will loose air till they get it right)
In later years plastic bottle made it easier, faster too since then they had half gallon bottles.
mpikas 12 years ago
mpikas 12 years ago
j574sbi 14 years ago
mpikas 12 years ago
spectacular 12 years ago
ilpug 12 years ago
i made a filling device for these. pretty simple and makes it a lot easier and cleaner.
wilson.joe 15 years ago
lipase 12 years ago
bowmaster 15 years ago
thermoelectric 15 years ago
naruto the ninja13 14 years ago
uldron 14 years ago