Introduction: Call of Duty Zombies Perk Cola Bottles!!!

These bottles are based of the ever so popular game Call of Duty Nazi Zombies.  Throughout the game characters drink these magical sodas that give them super human powers (Known as perks)

Juggernog- allows you to have more health
Quick revive- heals downed teamates quicker or in solo mode will allow you to be revived after a short amount of time.
Speed Cola- Allows the ingame perk sleight of hand to be in use making you reload almost twice as fast.
Double Tap RootBear- Allows the player to shoot his weapon twice as fast.


Check out my newest instructable (its about longboards. the way of the future)
 https://www.instructables.com/id/How-to-Make-A-Longboard-With-Video/

Step 1: Get Materials

1.) 4 clear bottles with a label that can be pealed off- also find them with a screwable lid.
2.) Printable stickers
3.) Goo-gone stuff (this was only used to get the nasty residue off the glasses- you dont have to get it)
4.) Color Printer
5.) A passion for Nazi Zombies
6.) Template- Color ( this gives the desired effect!)

The bottles I used ad a thread at the neck of the bottle allowing me to screw the cap back on with a liquid tight seal.  I advise you to get these ones and not the others(without the threads) Who knows how hard it would be to get the cap back on the bottle...

If you do not have an instructables account it is nesecary to view all the required pictures so go and make one!

Step 2: Bottles

Once you get the bottles peal the label off.  When I pealed the label off it left a nasty looking paper tear. I sprayed it with goo-gone, shaved it off with a knife, and then rubbed it all away with a towel. 

Another way to do it is to use rubbing alchohol and a towel.  You just get the towel wet and rubb it off.

There probley is a simpler way to do this, but this worked for me so I'm happy.

Step 3: Printing the Labels

The smaller set is perfect for the top of the bottles- however the larger set must be zoomed in to the preferred size- I zoomed it in to 165% for the best looking fit. ( This may not be true to your printer... Everyones is different)

to get the files just right click the picture below with your mouse and scroll down to the button that says "save picture as" then save the pic to your desired location. ( You may have to do a lot of shifting of the pictures...)

Be Carefull! test out printing them beforehand so you know where to shift the labels to and to not waste sticker paper


P.S.- Everyones printers are different so just get the labels in the right spot and you should be good to go.

Step 4: Applying the Sticker to the Top

Cut out all you stikers and follow the steps below-

Get the stickers you just printed out and peel the back off them.  Apply the smaller sticker to the top of your bottle. (My stickers were a little small so I used a sharpie and covered the metal label on the top).

Step 5: Applying the Sticker to the Front

Peel the front label from the backing and apply to the bottle. ( You would usually want the label to be situated rightside up and centered but if you dont want to then dont! It's your bottles!)

Step 6: Filling the Bottles

To fill the bottles I used food coloring and water- you can easily fill them with actual drinks, but I decided against it because if these are going to sit on my wall for awhile I dont want rotten old soda sitting up there too.


Double tap root bear-
1 red drop
1 green drop                                  However if one wanted to use actual root beer it would also give the desired effect.
a lot of yellow drops


Juggernog-
1 yellow drop                                 However if one wanted to use red mountain due or another red drink it would look awesome
a lot of red


Quick revive Cola-
1 green drop                                  One could use blue powerade instead
a lot of blue


Speed Cola-
1 blue drop                                     One could use maybe a monster energy drink or something that is green( or green moutain due)
a lot of green

Step 7: Finished Product

These bottles are awesome and should add a little spice to your life.  They are great for making movies or just showing off to your friends.

P.S.- If you have read this and You have Know Idea what these are you haven't lived yet so go look it up and get the game!

This game is AWESOME!!!!!

Step 8: Extra!!!!

Perk Cola songs can be found at this link at the bottom of the page.

http://callofduty.wikia.com/wiki/Perk-a-Cola

http://www.youtube.com/watch?v=hUpFv9I8p6M
 
http://www.youtube.com/watch?v=k3N063T9KsY&feature=related

http://www.youtube.com/user/andyandlars        - My youtube Channel!!!!!- Call of duty vids and More!



Comments

author
dde0485 made it!(author)2013-01-07

I used a hand sander and ran it over my caps for a few seconds. Gave them a good metallic look and go rid of the label!

author
NaziZombies128 made it!(author)2016-10-20

I'm making all 15, so get rekt

author
AvengedG made it!(author)2015-02-23

HOW DO YOU WASH THE BOTTLES WITHOUT WASHING OFF THE STICKERS?

author
NaziZombies128 made it!(author)2016-10-20

You just wash of the mouth of the bottle, duh!

author
leonardo.badillamaroto made it!(author)2016-01-15

jones soda works?

author
NaziZombies128 made it!(author)2016-10-20

Yeah but everyone uses that, I'm a rebel and use Jarritos Mexican soda bottles. And Jones is so stupid there twist on and offs are black, who wants black? I just order off eBay standard bottle caps that pop on and off and they already have the stickers on them and painted! Like this, there are still 2 whole sets of these left so get them before there gone!

mbJ7axER8bghR3kvVQ00jhA.jpg
author
Nateisoffthewall made it!(author)2016-05-03

Does anyone know how to prevent the water from going cloudy?

author
NaziZombies128 made it!(author)2016-10-20

I know just put half sink water, and half cold water or just mostly sink water. I had that problem too, so don't worry your not the only one.

author
NaziZombies128 made it!(author)2016-10-20

That what I'm using Goo-Gone is great to get that residue off, but I don't get why you put it in TV and movies its a video game thing, DUH!!!

author
ThatGuyAshton made it!(author)2016-10-09

Where to get the logos for the bottles.

author
dabbas made it!(author)2016-07-18

If you were to go out a use seltzer water as the base, then add desired food coloring. the liquids will glow under a black light and should work with purple LEDs as well.

author
nohumans made it!(author)2016-05-30

please tell me

author
nohumans made it!(author)2016-05-30

where to get the materials?

author
HendrikC1 made it!(author)2016-03-05

Hi im from europe belgium. And i dont find those kind of bottles :( does anyone know kind of bottles like that in my region?

author
zombieshizzle made it!(author)2016-04-28

gebruik shandy flesjes, zit geen draaidop op maar als je ze voorzichtig opent kan je ze er makkelijk weer opkllikken/lijmen

author
TylerS102 made it!(author)2016-04-27

Mule kick can be same color as juggernog but darker.

author
PieFaceMonster made it!(author)2016-04-22

Where did you find those clear glass bottles!?

author
ImaginedF made it!(author)2015-12-21

Awesome Instructable Dude! I figured since were having a Video game themed Nerf war, and there's a WAW zombies segment, These are perfect! I guess Im gonna use IRL drinks XD

author
Joshuapick made it!(author)2015-12-04

Hi were did you get the perks image from?

author
CamB3 made it!(author)2015-12-20

I just copy/pasted the image into a Drive document

author
CamB3 made it!(author)2015-12-20

thankyouthankyouthankyou!!!!!!!!!!!!! I made this for my brother's Christmas present and I think he'll be psyched!!!!!

author
elstoggy made it!(author)2015-11-15

Link to the labels?

author
Soulevanspiano made it!(author)2015-08-23

wheres phd flopper tombstone stamina mule kick

author
moll0125 made it!(author)2011-06-08

I definitely want to try this. Thanks for taking your time to make a tutorial of this.
Danke! This is wunderbar! :D

author
AnimaT made it!(author)2015-01-08

GET TO THE DER WUNDERFIZZ!!!!!

author
Soulevanspiano made it!(author)2015-08-23

WHAT GENERATOR IS OT ATTTTTT!!!!!!!!!!!!

author
dauriru made it!(author)2015-07-17

like this

Juggernog_Perk-a-Cola_Bottle_model_BOII.png
author
dauriru made it!(author)2015-07-17

great, but you missed the one on the neck

author
ZoleroxD made it!(author)2015-02-19

Quick Revive Juggernog Double tap Speed Cola

| | | |

\/ \/ \/ \/

8500995863_687ac76e0d_m.jpgBEV215.jpgBundaberg-Peachee-340ml.jpgmoutaindew-bottle.jpg
author
JoeJ7 made it!(author)2015-05-05

since when has rootbeer been peachee...21 century failed me

author
KurtSiemon made it!(author)2015-03-12

Hmm they can all be Mountain Dew now.

author
ZoleroxD made it!(author)2015-03-03

these are the mailing labels

http://www.staples.com/Avery-8164-White-Inkjet-Shi...

Goo gone Pen same Chemicals and cheaper should still work

http://shop.googone.com/All-Products/Original-Surf...

Cant find the dye he used

http://www.ebay.com.au/itm/McCormick-NEON-Assorted...

How ever you could always get the labels from the post office and dye from art/crafts shop

author
ZoleroxD made it!(author)2015-02-19

author
sarah.hoytster made it!(author)2014-12-29

Is there anywhere / anyway to buy these? I don't have a printer :/

author
milesduggan made it!(author)2014-11-14

I would suggest filling them with Powerade for a richer color. Also the color wont separate like food coloring. Just a friendly suggestion.

author
ZoleroxD made it!(author)2014-11-24

Smart better then just drinking powerade out of the normal bottles drink from the perk bottles ..... Drinkin is style (powerade gives you energy so its good for speed cola)

author
Algernon56 made it!(author)2014-09-04

These are pretty frickin great.

author
raestet made it!(author)2014-07-18

Sweet!

author
awesomegamer567 made it!(author)2013-10-29

i am going to use fruit punch for juggernog and lemonade root beer for double tap root beer. drinkable perks!!!

author
Krafty_Punk made it!(author)2013-08-27

This helped me so much! But can I still drink sodas out of them?

author
XBlox made it!(author)2013-06-18

I love the idea and they look great.
P.S. You can use dry ginger ale for the double tap root beer.

author
calebbenji made it!(author)2013-06-11

oh guys i found out what bottles he used there called Fit's Premium Root Beer

author
jrussell25 made it!(author)2013-03-23

how much will this cost? i dont have much money but iv been wanting to make them for a long time

author
mich+jaeger made it!(author)2013-02-08

what do you mean by a thread at the neck of the bottle? im confused.

author
larslovespeace made it!(author)2013-02-09

The cap was a screw on cap and not like most bottles. Most glass bottles nowadays have you use a bottle opener. These bottles were screw off making it easier for me to refill them.

author
larslovespeace made it!(author)2013-02-09

There is another tutorial with those ones in it. I was just trying to do the original bottles.

author
baconhawx made it!(author)2011-11-25

where do you get the stickers for the bottle caps

author
Deadpool25 made it!(author)2012-11-10

stickers work but you can also use Aleene's Original Tacky Glue

author
eternalwind made it!(author)2011-11-20

Wher do you get the glass bottles?

author
bom817 made it!(author)2012-01-09

yeah where do you get them??

About This Instructable

501,257views

807favorites

License:

Bio: FOLLOW MY INSTAGRAM! @gnarfarian
More by larslovespeace:Make A Professional LongboardCall of Duty Zombies Perk Cola Bottles!!!Double size Bed Loft!
Add instructable to: