With Instructables you can share what you make with the world, and tap into an ever-growing community of creative experts.
Arduino Mega does not work, the problem may be the mega?
Arduino + 2 Servos + Thumbstick (joystick)
Arduino Robotic Arm
Arduino + 2 servos + mouse
I used your code in a project. I would like to control 6 servos by 6 knobs through serial. I tried with only one servo, but it works with every knobs. I identify the servos by letters like a,b,c,d,e,f. ....any idea? Can I use multiple port.write() function? If anybody can help I would send my code.
Nice guide. I'm going to try this tonight =)
Aruino Tone (RTTL) Player
yes you can use a NANO for this project as well!!!
not really they are just proto wires for breadboards
sorry for the delay reply and yess I will write you a code for that
YES YOU CAN BUT YOU NEED TO CODE IT A LITTLE DIFFERENT
hey guys i want a little help for my project...........i want to control 4 servos with 2 joystick module,( with one joystick i want to control 2 servos from each axis)i made the servo to rotate continuous by using some help from you tube now i want that if i push the stick up than the servo start rotating and keep rotating until i release the pressure and when i release the pressure from stick the servo should stop immediately and when i push the stick down the servo start rotating in opposite direction (same for other axis with other servo ) , speed doesn't matter for me in this case i just want to use the stick as switches like when i push up it should start rotate clockwise and when i push down it start rotate counter clockwise,can somebody please help me with the code and connection to the arduino.thanks in advance.. :)
hey bro can u please help me with somethingi am using servos in the back wheels of car so i mod this motor to rotate continuously with help of you-tube videos now i want that if i push up the joystick module so the motor start rotating in that direction and keep rotating until i release the stick and when i release the pressure from stick the motor should stop immediately.can u please help me with the code in this case thnx in advance - AbhilashaK1
hey bro can u please help me with somethingi am using servos in the back wheels of car so i mod this motor to rotate continuously with help of you-tube videos now i want that if i push up the joystick module so the motor start rotating in that direction and keep rotating until i release the stick and when i release the pressure from stick the motor should stop immediately.can u please help me with the code in this case thnx in advance - AbhishekS298
I am Using Keyes_SJoys Joystick (the same one as SciencEg2 ^), can you explain more clearly how i should use it in this project
I already bought the parallax joystick but thanks for your help
thank you so much
yes you can use this just connect 5v to arduino 5v and gnd to gnd and X to analog 1 and Y to analog 2 and leave sw
Is there a way for me to use a different joystick because I only have this one
can we make it with arduino nano 3.0???
Car rims paint
Awesome project! It only took me two tries to get it right. Although I was wondering how would you get the motors to hold position when moved? Any help is much appreciated.
Traffic Signal / Stop Light Wiring with Arduino Controller
Arduino Traffic Light System.
Arduino traffic light simulator
Join 2 million + to receive instant DIY inspiration in your inbox.
Download our apps!
© 2016 Autodesk, Inc.