With Instructables you can share what you make with the world, and tap into an ever-growing community of creative experts.
Digispark DIY: The smallest USB Arduino
You need to install PS2Keyboard library
The source code & instruction is written in the article. The most easy way is to purchase a GL.inet router instead of other OpenWrt supported router.
I made a PCB for this:https://oshpark.com/shared_projects/fTk97wV9I added a reset button, and another button that should go on the bottom.
Seeedstudio RePhone: Fun & creative modular DIY smartphone
How to create webpages & setup website using Joomla CMS
Learning, Experience and Review the Makeblock 3 in 1 MBot Ranger Robot Kit
Queue_calling_system_Sender:11: error: 'PS2Keyboard' does not name a typeQueue_calling_system_Sender.ino: In function 'void setup()':Queue_calling_system_Sender:37: error: 'keyboard' was not declared in this scopeQueue_calling_system_Sender.ino: In function 'String getInput()':Queue_calling_system_Sender:75: error: 'keyboard' was not declared in this scopeQueue_calling_system_Sender:78: error: 'PS2_ENTER' was not declared in this scopeQueue_calling_system_Sender:102: error: 'PS2_BACKSPACE' was not declared in this scopewhere does the fault? //
can you give me the complete tutorial in making this project pls.. i need to pass my subject ahhaha... specially the codes thanks in advance... you can email me on my gmail acc. firstname.lastname@example.org
Wi-Fi controlled Remote Control Car without microcontroller
What is your material? Please test it with a piece of paper.
Hi, Help help. I urgently need help. I cant seem to laser engrave on any material even though the beam is there moving about. Thank You My model is DK-8-KZ
Open the alamm.ino file, change #define ALARM_AUTO_OFF 10 (line 3) to #define ALARM_AUTO_OFF 60
I have a cuestion. I'm currently working on a project that uses an Attiny85 as the uC rather than an Arduino UNO (using one would be completely overkill as it'll be used just to measure temperature and displaying it) The hardware is realy basic. It's an LM35 as a temperature sensor and a 16x2 LCD display with an I2C interface. Now, with this Attiny85 board is it really necesary to burn the bootloader? Or is it already installed (or burned) into the uC? Being that is an SMT chip. How can I burn the bootloader? Can it be done via usb? Or using the Arduino IDE? Thanks.
I have a cuestion. I'm currently working on a project that uses an Attiny85 as the uC rather than an Arduino UNO (using one would be completely overkill as it'll be used just to measure temperature and displaying it) The hardware is realy basic. It's an LM35 as a temperature sensor and a 16x2 LCD display with an I2C interface. Now, with this Attiny85 board is it really necesary to burn the bootloader? Or is it already installed (or burned) into the uC? Being that is an SMT chip. How can I burn the bootloader? Can it be done via usb? Thanks.
the alarm only turn on for a second
How to change the auto turn off alarm from 10 seconds to a minute?
L298N Motor Driver Controller Board
According to the digispark website, unlike regular Arduinos, the computer won't recognise the digispark as a USB device. That's why you must only plug the digispark in when the Arduino software tells you to. (during the upload process.)This is my experience also. The digispark uploads fine, but my computer still complains that it's not recognized.
Arduino Based LCD Digital Clock
One of the driver files wouldn't install, there is an address problem downloading and installing the Digispark version of the Arduino IDE, and now I'm discouraged.Any suggestions?
I want to put mine in someones breakfast cereal.I got "Start" to work one time, then my computer won't recognize anything is there.
How to setup and use the NEJE DK-5 Pro-5 Laser Engraver/Cutter
I'm using Miniature Laser Carver. Download: https://drive.google.com/drive/folders/0Bx7AGYzko9...
Works fine for me on Win 10 64-bit.
It works fine with Windows 10.I'm using Windows 10 64-bit and Arduino 1.6.11. Once you download the drivers and follow the instructions here:http://digistump.com/wiki/digispark/tutorials/connectingEverything works fine.
My Software is called "Laser_Carver_six_language_V3.5.1.exe" i downloaded it form the Internet ... I have tried V3.2.1 anr V 3.5.0 ... same Result - no Drag and Drop - Do you have a Link so i can try other software ???
Digispark Infrared Receiver:http://ediy.com.my/blog/item/74-digispark-infrared-receiver
I can't help you on this matter because I do not own a tablet.
Digispark works with Software Serial
Are you using the software that is included in the SD card? I noticed someone using different engraver software.
Please HEEELP!!!At my Software I can not Drg and Drop any Pic !!! Tried everything ... I have a DK-5
Learning, Experience and Review the Makeblock 3 in 1 mBot Ranger Robot Kit
one more question how can i program the attiny85 digispark usb with my tablet?
i have a question, how can i use serial with the attiny85 so i can see a sensor reading or so? please help me want to build a remote control bt i need to see some ir signals to program the chip. thanks
The download link is listed in Step 5
This is a common experience with this product. Mine stopped after about 3 hours of engraving. The laser is now too weak to even engrave paper. I suspect a problem with the power control electronics. If anyone has a solution to this, please share. The software is nice but gives a lot of errors - I recommend investing a bit more in a more reliable machine.
Try to install it under Windows 7 compatibility.
Can you please give us the code for the LCD Date and Time clock
Can you please give us the code
Join 2 million + to receive instant DIY inspiration in your inbox.
Download our apps!
© 2016 Autodesk, Inc.