How to build a sleepbox?

Not sure how to call such things, but here link with images. there any tutorial how to build similar things? Sorry for my English.

Posted by DmitryB33 4 hours ago

Potential $5 RC Hovercraft

Hey y'all, I was bored, so I made this RC hovercraft, kinda like a Tiny Whoov, from the guts of a $5 RC helicopter (sold at most FiveBelows). The idea is that a hovercraft is more fun than a cruddy helicopter, in addition to being a fun and easy DIY project for the weekend. It could be a nice gift to a kid. My first concern was that the motors would not provide enough power to get the thing moving. They give more than enough power, and this thing can MOVE. My second concern is that the differential thrust steering system (one motor turns faster than the other, steering the hovercraft) would not be effective enough. This is still a problem that I don't have the enthusiasm or time to solve anymore. Maybe someone could figure out how to reprogram the FC board to have more differential thrust (is that possible?), or somehow configure a servo or actuator without raising the cost of materials too much. Anyway, here's the concept, go have fun with it.Supplies:Foam platesHot glue$5 RC helicopter with 2 motors and receiver (LED optional, but really cool)Connector (the battery might be soldered directly to the FC board, so this will make it easier to fiddle with)Soldering iron (not %100 necessary, but it can come in handy)Propellers (see design notes)Design notes:Notice how the underside of the hull is curved and smooth. I used propellers from a Blade Inductrix FPV Pro, but any micro quad propellers should work. Notice the nice little compartment under the FC board where you can stick a battery without the need for Velcro or glue. This would be a very easy FPV mod, but that would add about $20 to the cost.

Posted by Thorondor95 6 hours ago

Connecting two DC power sources

Hi all,I'm working on a project where I will have two DC generators that are being powered by spinning turbines. These turbines will be spinning at different speeds and these speeds may vary over time (i.e. the voltage from the DC sources will almost always be different). There will also be instances where one isn't producing any voltage at all.I was wondering what it the best way to connect them? Should they be in series or in parallel? Should there be diodes?After they are connected the DC power will be fed into an inverter and converted to AC power.Thanks for any help!

Asked by KiannaB3 10 hours ago

Make output of USB Keyboard visible

Hi,I am completely new on this field:I try to decode signals from a USB keyboard to a computer with a logic analyzer...I faced some very confusing things there and now I'm wondering if that's even possible?If yes: -->what frequency is USB using, maybe my logic analyzer is to slow?-->any suggestions If no: --> do you know a another way to do something similar?The thing is, after all googling I found almost nothing about USB signals for HID. It's only written everywhere, that it is a very complicated protkoll.I simply want to know how the output of a USB keyboard looks like.can anyone help me?

Asked by noonin 10 hours ago

Electricity Generator

Hi all,Quick question. If I attach Neodymium magnets to bicycle rim (separating it by waste rubber tube) and copper winding to bicycle mud guard how much electricity can be generated? What needs to be done to increase the same?ThanksViraj

Asked by virajmoghe 17 hours ago

ARDUINO (Water Pump & 1 Relay module low/high level trigger-12VDC)

I just want to ask, how to turn on the water pump using 12 vdc relay low/high trigger, 9v battery and the arduino uno. I'm just a beginner and also I want to know how will be the wiring of this devices, I'm also having difficulties reading schematic diagrams.

Asked by VinceB29 1 day ago

Glitches with the Instructables Editor

While trying to make Instructables with the Editor, I have come across two glitches (if this is not the place to report bugs and errors, please inform me).1. The text boxes for the Intro and the Steps editors refuse to let me copy/paste anything into them. The pasted text appears for a split second, then disappears.2. The same thing happens with links. I type in a URL and the text for the link, press OK, will show up for a split second then disappear.I hope this helps to make Instructables a better place.

Posted by Thorondor95 1 day ago

What materials are needed to construct a steampunk light switch lever?

I’m trying to make the lever in this photo that I found on Pinterest. It would be really helpful if you could identify all the materials and link where I can find them. Thanks!

Asked by CRAZEDCLAM 1 day ago

Building: wireless monitor/tablet recycling old laptop parts

Please be positive and constructive with your questions and comments.Building wireless touchscreen ar1100 to bluetooth transmitte by Fearlessleader on Tue Mar 20, 2018 5:04 am Hi I have 15.4 samsung laptop screen I am converting to 4 wire touch overlay and want to us the ar1100 but need to go from the usb out bluetooth wireless mouse transmitter. I would need the same type of transmitter like any bluetooth mouse would have inside. The mini pc I am building has both bluetooth and wireless display.Parts list so far15.4 samsung screen pulled from a Dell laptop modle LTN154W1-L01Control board for the screen with hdmi ebay 30$ link 12v 3 amp power supply for the screen controler I already have but later I would build voltage control unit that would charge or power the whole unit. Again YouTube has videos and links for the part for this. And I really don't want to have a bunch a supplies to run it. While prototype it I will the final will run from the laptop I got the screen from. It should plenty of power for a single board computer like the new pi 3 to be added and the audio amp15.4 4 wire overlay conversion many sorce's about 50$ link $Ar1100 touch to usb mouse adafuit 10$ link wireless receiver. 20 to 40$ depending on features like if it has chromecasting and such I just need video so I think the 20$ unit will do nice. These can be found in many places, so I would think this to be open end item depending on features the builder wants. I would buy the best you can afford to leave it fexible .The last thing I need to make work would be usb transmitter to make the ar1100 bluetooth or matched pair of 2.4 dongles usb this is the only item missing. I could test the whole set up but would have run 1 usb cable, but that's a deal breaker for full wireless... If I had a old bluetooth mouse and knew how take its transmitter out, that work but a bluetooth usb adapter the would plug in the ar1100 board would be the thing I need.If someone would know how to remove the mouse transmitter and wire it to male usb plug I would be happy to buy it. I real want this to made from as much recycled parts as possible.I just don't want to have run a usb cable from ar1100 to the pc.I don't think the same usb dongle that's used to the pc is the same as the one used in every bluetooth mouse or keyboard. That's my idea for a wireless touchscreen handheld All the parts are easy to get I just need make the ar1100 usb board and wireless usb transmitter. The pc would use GA-h77n-wifi mini itx as it has both bluetooth & wireless display and wifi.Part 2The idea sound lol! I want to build a frame for the screen with speakers and laptop battery and used the power supply from the Dell laptop I got the screen from, that would need a small amp. Since the receiver is hdmi, I would think the audio would be there if not that would be simple to just use a bluetooth stereo headphones and run the earphone wires to the small audio amp.I would like any comments on this idea and a sorce the one part that missing the usb mouse transmitter for the ar1100 and this could be built.So What do you folks think? A portable monitor 100% wireless that could even double as touchscreen remote! I even thought down the road to add the new pi 3 to it as that would completely independent as low power tablet or connect to the pc that nvidia gpu and could stream pc games to My Nvidia shield too. With all the power of I7 2700k oc to 4.2ghz.The possibilities here are endless you and all kinds a features adding a mic and Webcam for video calls with sckype or google voice and messenger and bingo u have a voice and video over IPThis do able you think?All comments good or bad give to me straight.Oh but go easy on the grammar thing. I technology geek but a 56 year old high school drop out. But hay at 37 I was disabled with fractured spine by time I was 40 I did all computers repairs for my local high school and was building white box computers out of my home office. If there is 1 thing I have learned in this life anything is possible but you have to try!Please be positive and constructive with your questions and comments.

Posted by Fearlessleader62 1 day ago

Major Work Location/position sensor for a cricket bat

My name is NicholasI am in Year 12 at Parkes Christian School and making a major work that i can track where i am hitting a cricket ball on a bat. similar to what hot spot is and to be able to relay the information on the position to a phone via Bluetooth(video to help with what my idea is) At the moment i have ordered a Raspberry pi for the help transmit the data, EeonTex Pressure Sensing Fabric, EeonTex Conductive Fabric. But i dont know what else i would need so i can get the information of the position to a raspberry pi like what types of thread do i or is there some thing else i need as this is my first time making something like this Thanks in advanced

Posted by Nicholasrsk6190 1 day ago