3D Printing Toolbox - Wanhao

by KyleA37

603102

Intro: 3D Printing Toolbox - Wanhao

Printed this to hold all of my 3D printing tools. No hardware needed. All components snap to edge of toolbox. Allen Clip On holds all Allen keys that come with a Wanhao i3.

Also if you would like to alter my design, here is the link to my OnShape file. Its public so do as you please. https://cad.onshape.com/documents/e21965a3cd1b7bb1c467b593/w/42fd60e55b70ded27805cd38/e/ef80f57e6bc153389b5024e1

2 Comments

wold630 7 years ago

Looks great! How long did it take to print all the pieces?

KyleA37 7 years ago

Well as you may know, depends what infill percentage you use. Now I don't know exactly so I'm trying to pull from memory here. I only used 20% percent infill so I could speed it up. The black portion took ~16 hours if I remember correctly. All the clips could be done within 10 hours. Gray box was also under 10. All my prints I do overnight so I never know exact times. You slicer software will probably give you times if you need exact times.