Introduction: A F1 Car (Formula One) Model in Autodesk Fusion 360 for 3D Printing, Published As an STL File.

By

An F1 Car (Formula One) Model in Autodesk Fusion 360 for 3D Printing.

My school is Indian Institute of Technology Hyderabad (IIT H).

Attachments

Supplies

The material used for 3D printing was PLA (Poly Lactic acid), a thermoplastic. Autodesk Fusion 360 was used for creating the CAD model and Creality for the STL file.

Step 1: Creating Autodesk Fusion 360 File

Autodesk Fusion 360 model was created. The aerodynamics and aesthetics were made to match the real-world car to the maximum extent.

Step 2: Printing 3D Model

The 3D model was created with a lot of support. After creating a 3D model, I spend hours removing the supports carefully. Thus the final model was obtained.