Introduction: ARDUINO BLUETOOTH CONTROL 3 LEDs

By Visit my channel!
About: Hello World, I'm Ohm Awasthi, I'm a 16-year-old high school student, I have a keen interest in making projects from Arduino.

Hello World ! Welcome to OHM_s _lab

today we will make ARDUINO CONTROLLED LEDs ( 3 led control). This project is very basic project for starters.

I'm too a starter......I also find difficulties first in this projects like:

*Not connecting to the app

*Making correct coding suitable with application.\

I'll tell u how i solve these!

::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::

Supplies

To Make this project we need:

HARDWARES:

*1) RDUINO UNO

*2) 3 LEDs

*3) HC05 bluetooth module

SOFTWARE:

*1) Arduino IDE

*2) Application from playstore

(I will tell u link later.)

Step 1: CONNECTION

Connection is very simple.

CONNECTION OF HC05 TO ARDUINO:

First, connect RX of HC05 to TX of Arduino.

Second, connect TX of HC05 to RX of Arduino.

Third, connect GND(HC05) to GND(arduino).

Fourth, connect VCC to 5v.

:::::::::::::::::::::::::::::::::::::

FOR MORE INFORMATION VISIT MY YOUTUBE PAGE...

Step 2: Software TIME!!

Upload code to Arduino

LINK For Code:

https://drive.google.com/file/d/1iAHwpPCzmwcpEr87Q...

HERE i HAVE USE ARDUINO BLUECONTROL app from playstore.

LINK FOR APP:

https://play.google.com/store/apps/details?id=com....

***AFTER DOWNLOADING APP YOU HAVE TO GO TO SETTING OF APP AND SET IT ACCORDING TO THE CODE!! ***

Step 3: Testing!

The testing is very smooth.

I have also UPLOAD my youtube you can see IT'S WORKING!!!!!!!

MY VIDEO ON YOUTUBE
LINK:

https://www.youtube.com/watch?v=MyEsfnQxeY8