Introduction: Altoids Mini Battery Powered Fan
This is my homemade battery powered mini fan
Step 1:
Step 1: Materials
Hot glue gun
Scissors
Altoids box...(I have used a different box)
a piece of cardboard
1x AA Battery
switch
A small motor (1.5v-3v)
a pen
Electric cable
a piece of paper
Hot glue gun
Scissors
Altoids box...(I have used a different box)
a piece of cardboard
1x AA Battery
switch
A small motor (1.5v-3v)
a pen
Electric cable
a piece of paper
Step 2:
Step 2:
Connect the battery with a motor and switch
Connect the battery with a motor and switch
Step 3:
Step 3:
Make a hole in the altoids box
Make a hole in the altoids box
Step 4:
Step 4:
place the battery,motor and the switch in the box and glue it
place the battery,motor and the switch in the box and glue it
Step 5:
Step 5:
close the box
close the box
Step 6:
step 6:
Take a small piece of paper and roll it
Take a small piece of paper and roll it
Step 7:
glue it on the motor
Step 8:
Step 8:
make a fan blade out of cardboard
make a fan blade out of cardboard
Step 9:
Step 9
glue it on the motor
glue it on the motor
Step 10: Done!!!!!
![Epilog Challenge V](https://content.instructables.com/FGP/FD19/HFBKEI2U/FGPFD19HFBKEI2U.jpg?auto=webp&frame=1&width=320)
Participated in the
Epilog Challenge V
![Battery Powered Contest](https://content.instructables.com/F17/FTS5/HH2VJPTU/F17FTS5HH2VJPTU.jpg?auto=webp&frame=1&width=320)
Participated in the
Battery Powered Contest