Arduino Uno Counter

I made this project for Muslims who needs to keep track of how much they prayed et cetera.

Finishing photo is the photo with the Arduino Uno

Supplies

1) Arduino Uno & USB-B to USB-A cable

2) 3 push buttons

3) 1 large breadboard

4) 3 10K resistors

5) 8 M-M jumpers

6) 4 M-F jumpers

7) A PC or a laptop

8) 16x2 I2C LCD

Step 1: Plug in Your IIC LCD to Your Uno.

Plug the connections like GND to GND, VCC to VCC et cetera.

Step 2: Connect Your Buttons to the Breadboard

You can attach your buttons to the breadboard wherever you want.

Step 3: Connect Your 10k Resistors to the Breadboard

Connect them series with ground and the buttons output line NOT THE VCC LINE.

Step 4: Connect the Buttons to Your UNO

1st button's signal goes to 2

2nd button's signal goes to 3

3rd and the last button's signal goes to 4

Step 5: Begin Programming

Download and compile the .INO file and make sure it's in a file.