Arduino Uno Into Usb Keyboard

Intro: Arduino Uno Into Usb Keyboard

convert arduino uno work as a arduino leanardo,mico.which work as a HID devices

Convert arduino uno into usb mouse or keyboard emulator into four easy steps

Just we have to replace the arduino frimware

STEP 1: Download and Install Software

Download and install

1.unojoy usb keyboard frimware link:-click here

2.install atmel filp software link:-click here

STEP 2: DFU Mode

• After installing flip software
• Plugin arduino uno into your computer
• Upload simplejoystick.ino file
• reset the 8u2 or 16u2
• To do this, briefly bridge the reset pin with the ground. The pins are located near the USB connector, as shown in this picture. Connect them briefly with a piece of wire.

STEP 3: Now Follow Instructions

• after dfu mode
• Unzip unojoy.zip file
• Open folder unojoywin
• Run Turnintoajoystick windows batch file
• Upload simplejoystick.ino file

STEP 4: Install Joytokey to Emulated Keyboard

install joytokey to emulate or control the keyboard and mouse

It is easy to control games,media and use for interactive project

Comments

[shakthinandanp]

Can I use other sensors with this firmware?

[ArdaE1]

So, where do I get the simplejoystick.ino file?

[GeminiCreator1506]

Click on UnojoyArduinoSample folder. You fill find the .ino file there

[harshitsingh.111001]

How to turn my Arduino back to normal?

[azzy_f]

1.download ArduinoIDE (or open it)
2. Tools>Auto format (!DISCLAMER! : you only erasing the code on it not others files and stuff)
3wait and you're done

[Kunal Gokhe]

Step no. 3
After dfu mode
Run TurnintoArduino windows batch file