Assistive Mobile Device Holder

Introduction: Assistive Mobile Device Holder

This is an assistive phone holder which is used to hold mobile devices. The sample phone that will be used is an Oppo Reno. The prototype is done using a 3D printing machine. It will be mainly used for elderly.

Supplies

Printer model: flashforge dreamer
Material: ABS
Software: flashprint

Step 1: Sketching of the Mobile Device Holder

This shows a rough sketch of the product with its dimensions. We sketched it out on paper as well as on AP100 software.

Step 2: Designing of the Mobile Device Holder on Fusion 360 Software

This step is where we design the model using the autodesk fusion 360 software. After which we convert this file into an STL file and send it to the 3D printing machine for printing.

Step 3: Using a 3D Printer to Print Out the Prototype.

Using 3D printing to print out prototype.
Printer model: flashforge dreamer
Material: ABS
Software: flashprint

Be the First to Share

    Recommendations

    • Soup & Stew Speed Challenge

      Soup & Stew Speed Challenge
    • Fashion Challenge

      Fashion Challenge
    • 3D Printed Student Design Challenge

      3D Printed Student Design Challenge

    Comments