Astabil Tilting Circuit

Introduction: Astabil Tilting Circuit

About: I like Arduino, Raspberry Pi and Nividia Jetson

Make sure that you have all that you need for this easy project:

- one Red LED

- one green LED

2x 220 ohm resistors

2x 100microFarrad polarized capacitors

2x NPN tranzistors

Step 1: Soldering the Pices

using a soldering iron you must have something like the schematics or how i have did in the photos

Good luck!

Be the First to Share

    Recommendations

    • Rocks, Gems, and Stones Speed Challenge

      Rocks, Gems, and Stones Speed Challenge
    • 3D Printed Student Design Challenge

      3D Printed Student Design Challenge
    • Plastic Challenge

      Plastic Challenge

    Comments

    0
    NicolaeF
    NicolaeF

    Tip 2 years ago

    the colors are optionally. you may use what colors you like ;) in the schematics both LEDs are red, but I used one red LED and the other green