Introduction: Baby Moon Crib

By
About: -

This is how i made it... (ps you can find more instructions on the web)

Materials I have used:

1. Wood/MDF
2. Pencil
3. Wooden bar (for drawn circles)
4. Broomstick
5. Jig saw
6. Compressor with Staples gun
7. Wood glue 8. Drill and screw
9. Computer with printer

Step 1: Mdf Circle

To start you need to know the size of the mattress (I bought one, size 80cm 40cm 10cm).

Now you know the minimum size you can start with the base plate, hereafter I have drawn and saw the moon on the MDF using circles.

1. Wood/MDF
2. Pencil
3. Wooden bar for circles
5. Jig saw
6. Compressor with Staples gun
7. Wood glue

Step 2: Paneling of the Moon

Now you can start the paneling of the moon..

1. Wood/MDF
2. Pencil
5. Jig saw
6. Compressor with Staples gun
7. Wood glue

Step 3: Finish

Foot:
I used some planks drilled a hole, one that fits the broomstick in the planks. Screwed and glued it together.

Stars:
Printed stars with a computer, drawn on the wood. Cut out with a drill and jigsaw

1. Wood/MDF
4. Broomstick
5. Jig saw
7. Wood glue
8. Drill and screw
9. Computer with printer

Step 4: Done