Balloon Dog Tutorial

This tutorial will teach you how to make a ballon dog!

Supplies

Materials: Balloons (long ones)

Tools: Balloon Pump

Step 1:

Step 1: Stretch the balloon a few times

Step 2:

Step 2: Place the balloon end onto the pump and push in so the balloon coverers about one centimetre over the pump.

Step 3:

Step 3: With one hand hold the ballon that’s connected to the pump so it won’t slip and with the other hand push the end of the pump back and forth.

Step 4:

Step 4: Carefully take the balloon off the pump and tie the end of the balloon.

Step 5:

Step 5: Now you have an inflated balloon, to make a balloon dog first step is to twist about 2 and ½ inches of the end of the balloon.

Step 6:

Step 6: Next twist two 2 ¾ inch parts behind the first one. Take the two three-inch pieces and twist them together at least three times so that they resemble ears.

Step 7:

Step 7: About 4 inches away from the head fold the balloon and twist at 2 - 3 inches at least three times.

Step 8:

Step 8: Do the same thing listed in step 7 but adjust torso spacing to your liking. Decorate your dog and it's complete!