Introduction: Best Friends Forever (BFFs) Ornament
The best friends forever ornament.
These BFFs sometimes are at odds with each other, but have come together to deliver a special holiday message.
Merry Christmas!
Step 1: Print the BFFs
Download the BFFs_Print2.stl.
The orientation of the print has been set up for optimal printing of the front side of the ornament. It will require supports.
I printed at 33% fill rate and 0.1mm layer heights.
Attachments
Step 2: Print the Merry Christmas Banner
Down load the Sign_Print1.stl
Print it at 100% fill rate in what ever color you like.
Once printed glue it to the hooves of the BFFs. You will notice slots made for the sign.
Attachments
Step 3: Attach a String or Hook
Tie piece of string or thread or bend a metal hook into the tab on the elephants ear on the back of the ornament.
Hang on the tree and enjoy!
Step 4:
Note: The ornament fits within a 3 inch cube.
![First Time Author Challenge](https://content.instructables.com/FZT/F3UV/I1K3TK7U/FZTF3UVI1K3TK7U.jpg?auto=webp&frame=1&width=320)
Participated in the
First Time Author Challenge
![Formlabs Contest](https://content.instructables.com/FDI/8GJQ/HZMJ4I0V/FDI8GJQHZMJ4I0V.jpg?auto=webp&frame=1&width=320)
Participated in the
Formlabs Contest
![3D Printed Ornament Design Challenge](https://content.instructables.com/FKT/W514/I1LZ0TXM/FKTW514I1LZ0TXM.jpg?auto=webp&frame=1&width=320)
Participated in the
3D Printed Ornament Design Challenge