Broken CD Bird
Intro: Broken CD Bird
Hi, in this instructable we will give life to our old CDs, this time we will create a hummingbird shaped mobile with beautiful colors and reflections.
STEP 1: Materials
- Some CDs
- A small wooden sphere
- A walnut-shaped wood to form the body
- Hot silicone
- Wood glue
- Scalpel
- Cooking shears
- Ruler
- Black plasticine
- Round balsa sticks
- Vitraplom golden color
- Fuchsia and purple markers
STEP 2: Body of the Bird
Glue the two wooden figures and let dry.
STEP 3: Cut CDs
Trim the CD a little with the kitchen scissors.
To perform the separation of the two layers the scalpel is used as seen in the video.
Make the following form with the ruler and the scalpel on the CDs that are going to be used and with the scissors we cut through the guide the 4 pieces that form the wings and from the square the different sizes of triangles come out to stick them on the body and the head .
STEP 4: Paste CD Clippings
Paste the faces of the CDs.
For the face that we are not going to use put glue and then paste the two equal parts.
STEP 5: Wings
We put the first layer of wings, we put a point of glue to each of them, then successively we put the different pieces to form the wings of the hummingbird.
STEP 6: Tail
Form the figure of the tail of the hummingbird and stick with glue one piece on another as seen in the images. If a longer tail is desired, pieces of different sizes are made.
STEP 7: Arrange Wings on the Hummingbird
With silicone stick the wings to the hummingbird body.
STEP 8: Hummingbird Body
Stick with silicone each of the triangles cut on the body from bottom to top
STEP 9: Hummingbird's Beak
With the round balsa stick of 5 mm in diameter we measure a length of 8 cm and we divide it into two parts, the top part will be the longest and with the rounded tip and the bottom part is shorter and flatter. Then with the golden Vitraplon paint the peak, leave the paint with lumps or uneven to give a bit of realism and detail.
Finally, glue the two parts one on top of the other leaving it half open.
STEP 10: Eyes
With the plasticine make a ball of approximately 1 cm of diameter. With the scalpel, we divide it in half and place it in a colander and let it dry. Finally, glue the two parts on top of the peak leaving it half open.
STEP 11: Eye Contour
To form the eye contour we painted a CD on the white part with the fuchsia and purple markers, we cut it into smaller triangles to stick them on the head to the side and side of the beak. Finally, we paste the plasticine eyes made above the contours.
And we finish the remaining spaces by filling the head to give the final result.
STEP 12: Finishing
Hang inside or outside the house to decorate.
I hope that you all enjoyed this Instructable! Thanks for reading and watching.
Miranda.
17 Comments
That Redhead 4 years ago
miranda_sarmi 4 years ago
rachymarie 5 years ago
miranda_sarmi 5 years ago
wyldecent 5 years ago
Alpha_geek 5 years ago
I've got a stack of old CD's and I've been thinking that there must be something that cam be done with them to avoid them going to land fill, but all of the other projects I've seen have been ... clumsy, ugly, and generally not very nice.
However, I think your project is a game changer, and I'm guessing we'll see more and more projects along similar lines.
Congratulations on the design, and congratulations for a great Ible.
miranda_sarmi 5 years ago
Alpha_geek 5 years ago
I am in the extremely fortunate situation where I have a CNC router in the basement, which obviously removes the limitations of cutting along simple chord lines, and my first thought is to fashion the CD's into fish or reptile scales ... we'll see what I come up with ... :-)
miranda_sarmi 5 years ago
attosa 5 years ago
miranda_sarmi 5 years ago
nirim 5 years ago
miranda_sarmi 5 years ago
AnandM54 5 years ago
miranda_sarmi 5 years ago
WUVIE 5 years ago
miranda_sarmi 5 years ago