Introduction: Burners From Scrap

I doubt that you'll be able to precisely replicate this project due to the specific nature of the stuff I'm using, but it still may be interesting enough and inspirational in a way. Also I have this photos anyway so, yeah.

Here I'm showing a couple of burners, made from junk I'm collecting for some reason, and how I made them.

Step 1:

For the main body of the burners I used old glass salt and pepper shakers. They had a plastic lids on them but, they fell off at some point. For this project I replaced them with suitable aluminium screwing bottle caps. Also I had a piece of round leather belt of some sort (I believe those were used in sewing machines). I used it to create handles.

Step 2:

Firstly, I removed plastic inserts from caps.

Step 3:

Then I created round holes with a hole punch and installed metal eylets the way shown on the picture. Screw driver or other tool or object can be used to widen the stem opening to lock it in place.

Step 4:

I used a mop as a source for the wicks.

Step 5:

I used grooves in jars to attach the handles, and a bunch of staples to secure the pieces.

There's nothing really igenious anout this project but it was fun to make and to share, so thank you for your attention, and have nice crafting.

P.S.: Be careful with fire, snakes, and Liam Neeson's doughter (even if he doesn't know who you are).