CELTIC PENANNULAR BROOCH

10,400

287

24

Introduction: CELTIC PENANNULAR BROOCH

A Celtic brooch, called also penannular brooch, made with a scrap piece of thick copper wire.

If you like it vote for me in the contests!

(from wikipedia) Penannular: ("Annular" means formed as a ring and "penannular" formed as an incomplete ring) brooches feature a long pin attached by its head to a ring; the pin can move freely around the ring as far as the terminals. There is a gap between the terminals wide enough for the pin to pass through. Beginning as utilitarian fasteners in the Iron Age and Roman period, and in Ireland and Scotland from about 700 to 900, which are popularly known as Celtic brooches or similar terms. The brooches were worn by both men and women, usually singly at the shoulder by men and on the breast by women.

Jewelry Contest

Participated in the
Jewelry Contest

Homemade Gifts Contest 2015

Participated in the
Homemade Gifts Contest 2015

Leftovers Challenge

Participated in the
Leftovers Challenge

1 Person Made This Project!

Recommendations

  • Plywood Challenge

    Plywood Challenge
  • Plastic Contest

    Plastic Contest
  • Battery Powered Contest

    Battery Powered Contest

24 Discussions

0
WalterB74
WalterB74

1 year ago

Hi. Where do I find the actual instructions for this item?

0
repurposed
repurposed

4 years ago

Very nice - thanks for sharing!

0
marcellahella
marcellahella

Reply 4 years ago

You are welcome!

0
erosser
erosser

4 years ago

Very cool! I love these brooches, and had never thought to make one--you make it super-simple to follow along!

0
bartworker
bartworker

4 years ago

Very well done marcellahella! Simplicty at its best, I just love it!

0
Cairnz
Cairnz

4 years ago

Oh, thank you! I knew I was going to need to make something to hold closed the wrap my dear daughter in law knitted and sent to me. This will be just perfect! I love that it's all in one piece as we have and foster Cairn Terriers and I wouldn't want one to swallow a small piece!

0
marcellahella
marcellahella

Reply 4 years ago

You are welcome! If you do let me know how they turn out!

0
Cairnz
Cairnz

4 years ago

Oh, thank you! I knew I was going to need to make something to hold closed the wrap my dear daughter in law knitted and sent to me. This will be just perfect! I love that it's all in one piece as we have and foster Cairn Terriers and I wouldn't want one to swallow a small piece!

0
ilpug
ilpug

4 years ago

So, you annealed the copper to soften it, can you heat treat it to make it harder?

0
marcellahella
marcellahella

Reply 4 years ago

I don't know about heat treat it to make it harder, but when you hammer it, it became super hard again.

0
ilpug
ilpug

Reply 4 years ago

True, work hardening would for sure do it, especially with copper.

0
hippiechk
hippiechk

4 years ago

Awesome! Enter this in the jewelry contest...gets my vote!

0
marcellahella
marcellahella

Reply 4 years ago

It is in the jewelry contest, thanks for the support!

0
Edbed
Edbed

4 years ago

Great instructable. I love the simple elegance of the finished brooch.

0
marcellahella
marcellahella

Reply 4 years ago

Thanks for the nice comment!

0
mlawing
mlawing

4 years ago

Are you using any kind of finish to keep the copper from turning green?

0
marcellahella
marcellahella

Reply 4 years ago

No, I like the natural patina that copper get after a wile. Also copper items generally don't turn green if they don't get wet, just a darker color patina.

Also for example bracelets and rings if they get used a lot they stay super polished naturally, for some reason. They may just leave some green on the finger, that I don't mind.

But there is many waxes and other product available, if you like a shiny look.

0
marcellahella
marcellahella

Reply 4 years ago

No, I like the natural patina that copper get after a wile. Also copper items generally don't turn green if they don't get wet, just a darker color patina.

Also for example bracelets and rings if they get used a lot they stay super polished naturally, for some reason. They may just leave some green on the finger, that I don't mind.

But there is many waxes and other product available, if you like a shiny look.